|
|
|
|
Login | Create Account | |||
|
Items where Author is "Ahmed, Mohammed R." |
||
|
Group by: Item Type | No Grouping Number of items: 64. Prasad, Reemal D. and Ahmed, Mohammed R. (2023) Experimental evaluation of the performance and power output enhancement of a divergent solar chimney power plant by increasing the chimney height. Frontiers in Energy Research, 11 . NA. ISSN 2296-598X Khan, Mohammad G.M. and Ahmed, Mohammed R. (2023) Bayesian method for estimating Weibull parameters for wind resource assessment in the tropical region: a comparison between two-parameter and three - parameter Weibull distributions. Wind Energy Science, 8 (8). pp. 1277-1298. ISSN 2366-7621 Sisi, Misel J. and Ahmed, Mohammed R. and Rohindra, David (2022) Experimental investigation on the estimation of the viscous thermodynamic activation energy parameters of vegetable oils extracted from Cocos nucifera, Calophyllum inophyllum and Canarium indicum. Sustainable Energy Technologies and Assessments, 53 . NA. ISSN 2213-1388 Singh, Krishneel and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2022) Wind energy resource assessment for Cook Islands with accurate estimation of Weibull parameters using frequentist and Bayesian methods. IEEE Access, 10 . pp. 25935-25953. ISSN 2169-3536 Weerakoon, A.H.S. and Kim, B.H. and Cho, Y.J. and Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2021) Design optimization of a novel vertical augmentation channel housing a cross - flow turbine and performance evaluation as a wave energy converter. Renewable Energy, 180 . pp. 1300-1314. ISSN 0960-1481 Talama, Fatonga and Kutty, Saiyad S. and Kumar, Ajal and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2020) Assessment of wind energy potential for Tuvalu with accurate estimation of Weibull parameters. Energy Exploration and Exploitation, 38 (5). pp. 1742-1773. ISSN 0144-5987 Sisi, Misel J. and Ahmed, Mohammed R. and Rohindra, David (2020) Performance and emission characteristics of a diesel engine employing straight vegetable oils from Vanuatu as fuels. Advances in Mechanical Engineering, 12 (9). NA. ISSN 1687-8140 Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2020) Effect of oscillating water column chamber inclination on the performance of a Savonius rotor. Journal of Offshore Mechanics and Arctic Engineering, 142 (4). 042002-1. ISSN 0892-7219 Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Estimation of different wind characteristics parameters and accurate wind resource assessment for Kadavu, Fiji. AIMS Energy, 7 (6). pp. 760-791. ISSN 2333-8326 Singh, Krishneel and Bule, Leonie and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Wind energy resource assessment for Vanuatu with accurate estimation of Weibull parameters. Energy Exploration and Exploitation, 37 (6). pp. 1804-1832. ISSN 0144-5987 Ahmed, Mohammed R. and Nabolaniwaqa, Epeli (2019) Performance studies on a wind turbine blade section for low wind speeds with a Gurney flap. Journal of Energy Resources Technology - Transactions of ASME, 141 (11). NA. ISSN 0195-0738 Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Wind energy resource assessment for Suva, Fiji, with accurate Weibull parameters. Energy Exploration and Exploitation, 37 (3). pp. 1009-1038. ISSN 0144-5987 Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2019) Design and Optimization of a Ducted Marine Current Savonius Turbine for Gun-barrel Passage, Fiji. Journal of Offshore Mechanics and Arctic Engineering, 141 (2). 021901-1. ISSN 0892-7219 Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2018) Performance improvement of an oscillating water column wave energy converter by geometry modification. Journal of Mechanical Science and Technology, 32 (12). pp. 5729-5736. ISSN 1738-494X Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2018) Design and optimization of airfoils and a 20 kW wind turbine using multi-objective genetic algorithm and HARP_Opt code. Renewable Energy, NA . NA. ISSN 0960-1481 Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. and Sharma, R.N. (2018) On the simulation of regular waves in a numerical wave tank. Advances and Applications in Fluid Mechanics, 21 (3). pp. 325-341. ISSN 0973-4686 Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2018) Studies on the performance of Savonius rotors in a numerical wave tank. Ocean Engineering, 158 . pp. 29-37. ISSN 0029-8018 Prasad, Deepak D. and Kim, C.G. and Kang, H.G. and Ahmed, Mohammed R. and Lee, Y.H. (2017) Performance and flow characteristics of single and a novel double oscillating water column devices. Journal of Mechanical Science and Technology, 31 (12). pp. 5879-5886. ISSN 1738-494X Ahmed, Mohammed R. and Patel, Sandeep K. (2017) Computational and experimental studies on solar chimney power plants for power generation in Pacific Island Countries. Energy Conversion and Management, 149 . pp. 61-78. ISSN 0196-8904 Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. and Sharma, Rajnish N. (2017) Validation of a Piston Type Wave-maker Using Numerical Wave Tank. Ocean Engineering, 131 . pp. 57-67. ISSN 0029-8018 Aukitino, Tiaon and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2017) Wind energy resource assessment for Kiribati with a comparison of different methods of determining Weibull parameters. Energy Conversion and Management, TBC . pp. 641-660. ISSN 0196-8904 Singh, Naznil and Sivan, Rajneel and Sotoa, Manuialouolaga and Faizal, Mohammed and Ahmed, Mohammed R. (2016) Experimental studies on parallel wavy channel heat exchangers with varying channel inclination angles. Experimental Thermal and Fluid Science, 75 . pp. 173-182. ISSN 0894-1777 Sharma, Kaushik and Ahmed, Mohammed R. (2016) Wind energy resource assessment for the Fiji Islands: Kadavu Island and Suva Peninsula. Renewable Energy, 89 . pp. 168-180. ISSN 0960-1481 Ram, Krishnil R. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2016) Experimental studies on the flow characteristics in an inclined bend-free OWC device. Journal of Ocean Engineering and Science, 1 (1). pp. 77-83. ISSN 2468-0133 Kim, B.H. and Wata, Joji and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2015) Numerical and experimental studies on the PTO system of a novel floating wave energy converter. Renewable Energy, 79 . pp. 111-121. ISSN 0960-1481 Ram, Krishnil R. and Narayan, Sumesh and Ahmed, Mohammed R. and Nakavulevu, P. and Lee, Y.H. (2014) In Situ near shore wave resource assessment in the Fiji Islands. Energy for Sustainable Development, 23 . pp. 170-178. ISSN 0973-0826 Reddy, Sandeep K. and Ahmed, Mohammed R. (2014) In - situ wave resource assessment near Taveuni, Fiji Islands. Journal of Renewable and Sustainable Energy, 6 (042001). pp. 1-13. ISSN NA Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2014) Flow and performance characteristics of a direct drive turbine for wave power generation. Ocean Engineering, 81 . pp. 39-49. ISSN 0029-8018 Goundar, Jai and Ahmed, Mohammed R. (2014) Marine current energy resource assessment and design of a marine current turbine for Fiji. Renewable Energy, 65 . pp. 14-22. ISSN 0960-1481 Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Young-Ho (2014) A design outline for floating point absorber wave energy converters. Advances in Mechanical Engineering, 2014 . pp. 1-18. ISSN 1687-8132 Chandra, Vineet V. and Ahmed, Mohammed R. (2014) Experimental and computational studies on a steam jet refrigeration system with constant area and variable area ejectors. Energy Conversion and Management, 79 . pp. 377-386. ISSN 0196-8904 Patel, Sandeep K. and Prasad, Deepak D. and Ahmed, Mohammed R. (2014) Computational studies on the effect of geometric parameters on the performance of a solar chimney power plant. Energy Conversion and Management, 77 . pp. 424-431. ISSN 0196-8904 Goundar, Jai and Ahmed, Mohammed R. (2013) Design of a horizontal axis tidal current turbine. Applied Energy, 111 . pp. 161-174. ISSN 0306-2619 Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Low reynolds number airfoil optimization for wind turbine applications using genetic algorithm. Journal of Renewable and Sustainable Energy, 5 (052007). pp. 1-15. ISSN 1941-7012 Ahmed, Mohammed R. and Faizal, Mohammed and Lee, Y.H. (2013) Optimization of blade curvature and inter-rotor spacing of Savonius rotors for maximum wave energy extraction. Ocean Engineering, 65 . pp. 32-38. ISSN 0029-8018 Faizal, Mohammed and Ahmed, Mohammed R. (2013) Experimental studies on a closed cycle demonstration OTEC plant working on small temperature difference. Renewable Energy, 51 . pp. 234-240. ISSN 0960-1481 Singh, Ronit K. and Ahmed, Mohammed R. (2013) Blade design and performance testing of a small wind turbine rotor for low wind speed applications. Renewable Energy, 50 . pp. 812-819. ISSN 0960-1481 Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2013) Effect of turbine section orientation on the performance characteristics of an oscillating water column device. Experimental Thermal and Fluid Science, 44 . pp. 642-648. ISSN 0894-1777 Kim, K.P. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Efficiency improvement of a tidal current turbine utilizing a larger area of channel. Renewable Energy, 48 . pp. 557-564. ISSN 0960-1481 Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2012) Numerical and experimental studies on hydrofoils for marine current turbines. Renewable Energy, 42 . pp. 173-179. ISSN 0960-1481 Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2012) Effect of partial blockage of air duct outlet on performance of OWC device. Journal of Central South University, 19 (3). pp. 748-754. ISSN 2095-2899 Faizal, Mohammed and Ahmed, Mohammed R. (2012) Experimental studies on a corrugated plate heat exchanger for small temperature difference applications. Experimental Thermal and Fluid Science, 36 . pp. 242-248. ISSN 0894-1777 Ahmed, Mohammed R. (2012) Blade sections for wind turbine and tidal current turbine applications – current status and future challenges. International Journal of Energy Research, 36 (7). pp. 829-844. ISSN 0363-907X Singh, Ronit K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2012) Design of a low Reynolds number airfoil for small horizontal axis wind turbines. Renewable Energy, 42 . pp. 66-76. ISSN 0960-1481 Wata, Joji and Faizal, Mohammed and Talu, Boniface and Vanawalu, Lesia and Puamau, Sotia and Ahmed, Mohammed R. (2011) Studies on a low Reynolds number airfoil for small wind turbine applications. Science China Technological Sciences, 54 (7). pp. 1684-1688. ISSN 1674-7321 Ahmed, Mohammed R. and Narayan, Sumesh and Zullah, M.A. and Lee, Y.H. (2011) Experimental and numerical studies on a low reynolds number airfoil for wind turbine blades. JSME International (prev. Series B) Journal of Fluid Science and Technology, 6 (3). pp. 357-371. ISSN 1340-8054 Faizal, Mohammed and Ahmed, Mohammed R. and Kim, C.G. and Lee, Y.H. (2011) Experimental studies of water wave characteristics in a wave channel. International Journal of Fluid Mechanics Research, 38 (2). pp. 167-178. ISSN 1064-2277 Faizal, Mohammed and Ahmed, Mohammed R. (2011) Experimental studies on a corrugated plate heat exchanger for OTEC applications, experimental thermal and fluid science. Experimental Thermal and Fluid Science, 36 . pp. 242-248. ISSN 0894-1777 Faizal, Mohammed and Ahmed, Mohammed R. (2011) On the ocean heat budget and ocean thermal energy conversion. International Journal of Energy Research, 35 (13). pp. 1119-1144. ISSN 0363-907X Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. and Lee, Y.H. (2011) Performance studies on an oscillating water column employing a savonius rotor. Science China Technological Sciences, 54 (7). pp. 1674-1679. ISSN 1674-7321 Wata, Joji V. and Faizal, Mohammed and Talu, Boniface and Vanawalu, Lesia and Puamau, Sotia and Ahmed, Mohammed R. (2011) Studies on a low Reynolds number airfoil for small wind turbine applications. Science China Technological Sciences, 54 (7). pp. 1684-1688. ISSN 1674-7321 Prasad, Deepak D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Effect of front guide nozzle shape on the flow characteristics in an augmentation channel of a direct drive turbine for wave power generation. Science China Technological Sciences, 53 (1). pp. 46-51. ISSN 1674-7321 Ram, Krishnil R. and Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2010) Experimental studies on the flow characteristics in an oscillating water column device. Journal of Mechanical Science and Technology, 24 (10). pp. 2043-2050. ISSN 1738-494X Ahmed, Mohammed R. and Faizal, Mohammed and Prasad, Krishnil and Cho, Y.J. and Kim, C.G. and Lee, Y.H. (2010) Exploiting the orbital motion of water particles for energy extraction from waves. Journal of Mechanical Science and Technology, 24 (4). pp. 943-949. ISSN 1738-494X Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2010) On utilizing the orbital motion in water waves to drive a Savonius rotor. Renewable Energy, 35 (1). pp. 164-169. ISSN 0960-1481 Zullah, M.A. and Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a wave energy converter using numerical simulation technique. Science China Technological Sciences, 53 (1). pp. 13-18. ISSN 1674-7321 Prasad, Deepak D. and Uliate, Tuputa and Ahmed, Mohammed R. (2009) Wind loads on low-rise building models with different roof configurations. International Journal of Fluid Mechanics Research, 36 (3). pp. 231-243. ISSN 1064-2277 Ahmed, Mohammed R. and Talama, Fatonga (2008) Flow characteristics and local heat transfer rates for a heated circular cylinder in a crossflow of air. International Journal of Fluid Mechanics Research, 35 (1). pp. 76-93. ISSN 1064-2277 Ahmed, Mohammed R. and Takasaki, T. and Kohama, Y. (2007) Aerodynamics of a NACA4412 airfoil in ground effect. American Institute of Aeronautics and Astronautics (AIAA) Journal, 45 (1). pp. 37-47. ISSN 0001-1452 Ahmed, Mohammed R. and Sharma, S.D. (2006) Turbulent mixing enhancement with a 20 degrees chute mixer. Experimental Thermal and Fluid Science, 30 (3). pp. 161-174. ISSN 0894-1777 Ahmed, Mohammed R. (2005) Aerodynamics of a cambered airfoil in ground effect. International Journal of Fluid Mechanics Research, 32 (2). pp. 157-183. ISSN 1064-2277 Ahmed, Mohammed R. and Sharma, S.D. (2005) Turbulent mixing enhancement with a 10o chute mixer. Aircraft Engineering and Aerospace Technology, 77 (5). pp. 404-414. ISSN 0002-2667 Ahmed, Mohammed R. and Sharma, S.D. (2005) An investigation on the aerodynamics of a symmetrical airfoil in ground effect. Experimental Thermal and Fluid Science, 29 (6). pp. 633-647. ISSN 0894-1777 Venugopalan, V. and Hasan, M.N. and Ahmed, Mohammed R. (2004) Numerical simulation of turboramjet engines for performance studies. Modeling, Measurement and Control, Series B, 73 (6). pp. 35-54. ISSN 1259-5969 |