USP Electronic Research Repository

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Authors | Item Type
Jump to: A | B | C | F | G | H | I | J | K | M | N | O | P | R | S | V | W | Z
Number of items at this level: 151.

A

Ahmed, Mohammed R. (2005) Aerodynamics of a cambered airfoil in ground effect. International Journal of Fluid Mechanics Research, 32 (2). pp. 157-183. ISSN 1064-2277

Ahmed, Mohammed R. (2010) Blade sections for wind turbine and tidal current turbine applications - current trends and future challenges. [Conference Proceedings]

Ahmed, Mohammed R. (2012) Blade sections for wind turbine and tidal current turbine applications – current status and future challenges. International Journal of Energy Research, 36 (7). pp. 829-844. ISSN 0363-907X

Ahmed, Mohammed R. (2004) Flow over thick airfoils in ground effect - an investigation on the influence of camber. [Conference Proceedings]

Ahmed, Mohammed R. (2014) Overview of Ocean Energy Research at USP. [Conference Proceedings]

Ahmed, Mohammed R. (2012) Overview of wave and tidal current energy research in the South Pacific. [Conference Proceedings]

Ahmed, Mohammed R. and Faizal, Mohammed and Lee, Y.H. (2011) Employing multiple arrays of savonius rotors for maximum energy extraction from the orbital motion in ocean waves. [Conference Proceedings]

Ahmed, Mohammed R. and Faizal, Mohammed and Lee, Y.H. (2013) Optimization of blade curvature and inter-rotor spacing of Savonius rotors for maximum wave energy extraction. Ocean Engineering, 65 . pp. 32-38. ISSN 0029-8018

Ahmed, Mohammed R. and Faizal, Mohammed and Prasad, K. and Lee, Y.H. and Kim, C.G. and Cho, Y.J. (2008) Exploiting the orbital motion of water particles for energy extraction from the waves. [Conference Proceedings]

Ahmed, Mohammed R. and Faizal, Mohammed and Prasad, Krishnil and Cho, Y.J. and Kim, C.G. and Lee, Y.H. (2010) Exploiting the orbital motion of water particles for energy extraction from waves. Journal of Mechanical Science and Technology, 24 (4). pp. 943-949. ISSN 1738-494X

Ahmed, Mohammed R. and Nabolaniwaqa, Epeli (2012) Performance improvement of a wind turbine blade designed for low wind speeds with a passive trailing edge flap. [Conference Proceedings]

Ahmed, Mohammed R. and Narayan, Sumesh and Zullah, M.A. and Lee, Y.H. (2010) Experimental and numerical studies on a low Reynolds number airfoil for wind turbine blades. [Conference Proceedings]

Ahmed, Mohammed R. and Narayan, Sumesh and Zullah, M.A. and Lee, Y.H. (2011) Experimental and numerical studies on a low reynolds number airfoil for wind turbine blades. JSME International (prev. Series B) Journal of Fluid Science and Technology, 6 (3). pp. 357-371. ISSN 1340-8054

Ahmed, Mohammed R. and Sharma, S.D. (2006) Turbulent mixing enhancement with a 20 degrees chute mixer. Experimental Thermal and Fluid Science, 30 (3). pp. 161-174. ISSN 0894-1777

Ahmed, Mohammed R. and Sharma, S.D. (2005) An investigation on the aerodynamics of a symmetrical airfoil in ground effect. Experimental Thermal and Fluid Science, 29 (6). pp. 633-647. ISSN 0894-1777

Ahmed, Mohammed R. and Takasaki, T. and Kohama, Y. (2007) Aerodynamics of a NACA4412 airfoil in ground effect. American Institute of Aeronautics and Astronautics (AIAA) Journal, 45 (1). pp. 37-47. ISSN 0001-1452

Ahmed, Mohammed R. and Takasaki, T. and Kohama, Y. (2006) Experiments on the aerodynamics of a cambered airfoil in ground effect. [Conference Proceedings]

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2014) Input-output feedback linearization control of linear induction motors including the dynamic end-effects. [Conference Proceedings]

Ananthanarayanan, Rajeshkannan (2010) Deformation behaviour of sintered silicon–copper steel preforms of various aspect ratios during cold upsetting. The International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 509-515. ISSN 0268-3768

Ananthanarayanan, Rajeshkannan (2010) Workability studies on cold upsetting of sintered copper alloy preforms. Materials Research, 13 (4). pp. 457-464. ISSN 1516-1439

Ananthanarayanan, Rajeshkannan and Mehta, Utkal V. (2014) Deformation study of sintered iron – carbon – silicon – copper steel compacts during cold forging. Materials and Manufacturing Processes, 29 (4). pp. 442-447. ISSN 1042-6914

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2013) Phenomenon of instantaneous work hardening characteristics of sintered cold deformed Cu alloy preforms. Advanced Materials Research, 651 . pp. 295-301. ISSN 1022-6680

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2009) Strain hardening behaviour in sintered Fe–0.8%C–1.0%Si–0.8%Cu powder metallurgy preform during cold upsetting. [Conference Proceedings]

Ananthanarayanan, Rajeshkannan and Rai, S. N. and Chand, M and Prasad, N and Ram, R and Naicker, M (2014) Densification behaviour of sintered - forged aluminium composite preforms. Journal of Engineering Manufacture, 228 (3). pp. 441-449. ISSN 0954-4054

Assaf, Mansour and Khan, S. and Das, S.R. and Biswas, S.N. (2013) Energy efficient optimization of wireless embedded sensor networks. World Journal of Engineering, 10 (3). pp. 273-282. ISSN 1708-5284

B

Bijay, Pritika and Schulte, V. and Prasad, Shivneel (2013) An overview of climate - smart technologies in the Pacific region. In: Climate-Smart Technologies-Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Climate Change Management . Springer-Verlag Berlin Heidelberg , Germany, pp. 3-18. ISBN 9783642377525 online 9783642377532

Bijay, Pritika and Singh, Anirudh (2012) Viability of using cassava as a feedstock for bioethanol production in Fiji. [Conference Proceedings]

C

Chand, Praneel and Carnegie, D.A. (2008) Feedback coordination of limited capability mobile robots. [Conference Proceedings]

Chand, Praneel and Carnegie, D.A. (2012) A two-tiered global path planning strategy for limited memory mobile robots. Robotics and Autonomous Systems, 60 (2). pp. 309-321. ISSN 0921-8890

Chand, Praneel and Onwubolu, Godfrey C. and Kumar, Shivendra (2004) Modelling and simulation of a PC based computer numerically controlled drilling machine worktable. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 218 (B11). pp. 1625-1630. ISSN 0954-4054

Chand, Reenal R. and Kim, I-S. and Lee, J-H. and Kim, J-S. (2013) Numerical and experiment study of residual stress and strain in multi - pass GMA welding. Advanced Materials Research, 717 . pp. 403-409. ISSN 1022-6680

Chand, Reenal R. and Kim, I-S. and Lee, J-H. and Kim, J-S. (2013) Prediction welding quality in multi - pass welding process using Mahalanobis distance method. Applied Mechanics and Materials, 291-29 . pp. 2688-2693. ISSN 1660-9336

Chand, Reenal R. and Kim, I-S. and Lee, J-H. and Lee, J-P. and Shim, J-Y. and Kim, Y-S. (2014) A study on welding quality of robotic arc welding process using Mahalanobis distance method. Materials Science Forum, 773/77 . pp. 767-773. ISSN 1662-9752

Chand, Reenal R. and Kim, I. and Lee, J. and Jung, S. and Lee, J. (2012) Numerical studies on residual stress and strain distribution in Thick-Welded Plate. Asian International Journal of Science and Technology in Production and Manufacturing Engineering, 5 (4). pp. 65-71. ISSN 1906-151X

Chand, Reenal R. and Kim, I. and Lee, J.P. and Kim, Y.S. (2013) Numerical and experimental study of residual stress and strain in multi - pass GMA welding. Journal of Achievement in Materials and Manufacturing Engineering, 57 (1). pp. 31-37. ISSN 1734-8412

Chandra, Rohitash and Wong , Gary and Sharma, Anuraganand (2016) Memetic cooperative neuro-evolution for chaotic time series prediction. In: Neural Information Processing. Lecture Notes in Computer Science . Springer International Publishing, Japan, pp. 299-308. ISBN 978-3-319-46674-3

Chandra, Vineet V. and Ahmed, Mohammed R. (2014) Experimental and computational studies on a steam jet refrigeration system with constant area and variable area ejectors. Energy Conversion and Management, 79 . pp. 377-386. ISSN 0196-8904

Chandra, Vineet V. and Ahmed, Mohammed R. (2011) Wind effect on cooling load estimation. [Conference Proceedings]

Chandra, Vineet V. and Hemstock, Sarah L. (2014) A biomass energy flow chart for Fiji. Biomass and Bioenergy, 72 . pp. 117-122. ISSN 0961-9534

Cho, Y.J. and Zullah, M.A. and Faizal, Mohammed and Choi, Y.D and Lee, Y.H. (2012) A study on the flow characteristics of a direct drive turbine for energy conversion generation by experiment and CFD. [Conference Proceedings]

Cirrincione, Maurizio and Pucci, M. and Vitale, G. (2014) Neural MPPT of variable pitch wind generators with induction machines in a wide wind speed range. IEEE Transactions on Industry Applications, 49 (2). pp. 942-953. ISSN 0093-9994

F

Faizal, Mohammed and Ahmed, Mohammed R. (2013) Experimental studies on a closed cycle demonstration OTEC plant working on small temperature difference. Renewable Energy, 51 . pp. 234-240. ISSN 0960-1481

Faizal, Mohammed and Ahmed, Mohammed R. (2011) Experimental studies on a corrugated plate heat exchanger for OTEC applications, experimental thermal and fluid science. Experimental Thermal and Fluid Science, 36 . pp. 242-248. ISSN 0894-1777

Faizal, Mohammed and Ahmed, Mohammed R. (2012) Experimental studies on a corrugated plate heat exchanger for small temperature difference applications. Experimental Thermal and Fluid Science, 36 . pp. 242-248. ISSN 0894-1777

Faizal, Mohammed and Ahmed, Mohammed R. (2010) Flash evaporation desalination for applications in OTEC plants. [Conference Proceedings]

Faizal, Mohammed and Ahmed, Mohammed R. (2010) Heat transfer studies on corrugated plate heat exchanger for OTEC applications. [Conference Proceedings]

Faizal, Mohammed and Ahmed, Mohammed R. (2011) On the ocean heat budget and ocean thermal energy conversion. International Journal of Energy Research, 35 (13). pp. 1119-1144. ISSN 0363-907X

Faizal, Mohammed and Ahmed, Mohammed R. and Kim, C.G. and Lee, Y.H. (2011) Experimental studies of water wave characteristics in a wave channel. International Journal of Fluid Mechanics Research, 38 (2). pp. 167-178. ISSN 1064-2277

Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2011) Experimental studies on a botttom-hinged pendulor wave energy converter in a wave channel. [Conference Proceedings]

Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2010) On utilizing the orbital motion in water waves to drive a Savonius rotor. Renewable Energy, 35 (1). pp. 164-169. ISSN 0960-1481

Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Young-Ho (2014) A design outline for floating point absorber wave energy converters. Advances in Mechanical Engineering, 2014 . pp. 1-18. ISSN 1687-8132

Faizal, Mohammed and Kim, B.H. and Kim, C.G. and Lee, N.J. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Experimental studies on the PTO system of a novel floating wave energy converter. [Conference Proceedings]

G

Gangopadhyay, Partha and Shankar, S. (2016) Energy efficiency in the ACI (ASEAN-China-India) countries: is there room for regional policy coordination? International Journal of Development and Conflict, 6 (2). pp. 121-135. ISSN 2010-2690

Gardiner, Derek J. and Roy, S. and Djurovic, M. and Corkish, R.P. and De Alwis, A. and Yoshino, H. and Raturi, Atul K. and Ravindran, M. and Dasappa, S. and Kumar, A. and Hasan, M.N. (2009) Science plan on sustainable energy. [Professional and Technical Reports]

Goundar, Jai and Ahmed, Mohammed R. (2014) Design and Optimization of a Horizontal Axis Marine Current Turbine. [Conference Proceedings]

Goundar, Jai and Ahmed, Mohammed R. (2013) Design of a horizontal axis tidal current turbine. Applied Energy, 111 . pp. 161-174. ISSN 0306-2619

Goundar, Jai and Ahmed, Mohammed R. (2011) Experimental and numerical studies on hydrofoils for horizontal axis marine current turbines. [Conference Proceedings]

Goundar, Jai and Ahmed, Mohammed R. (2014) Marine current energy resource assessment and design of a marine current turbine for Fiji. Renewable Energy, 65 . pp. 14-22. ISSN 0960-1481

Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2010) Numerical and experimental studies on hydrofoils for marine current turbines. [Conference Proceedings]

Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2012) Numerical and experimental studies on hydrofoils for marine current turbines. Renewable Energy, 42 . pp. 173-179. ISSN 0960-1481

Goundar, Jai and Narayan, Sumesh and Ahmed, Mohammed R. (2012) Design of a horizontal axis wind turbine for Fiji. [Conference Proceedings]

Goundar, Jai and Prasad, Deepak D. and Ahmed, Mohammed R. (2013) Design and performance testing of a ducted savonius turbine for marine current energy extraction. [Conference Proceedings]

H

Hoasirao, Victor and Faizal, Mohammed and Ahmed, Mohammed R. (2014) Effect of phase shift of a sinusoidal plate heat exchanger on the heat transfer characteristics. [Conference Proceedings]

Hussein, Shamina and Chandra, R. and Sharma, Anuraganand (2016) Multi - step - ahead chaotic time series prediction using coevolutionary recurrent neural networks. [Conference Proceedings]

I

Islam, F M Rabiul and Mamun, Kabir and Prakash, Shaneel (2016) A portable wave-solar energy harvesting device. Australian Government-IP Australia, Australia.

J

Jeong, J.W. and Kim, I.S. and Chand, Reenal R. and Lee, J.H. (2012) A study on simulation model and kinematic model of welding robot. Journal of Achievement in Materials and Manufacturing Engineering, 55 (1). pp. 1-8. ISSN 1734-8412

Jeong, Y-J. and Kim, H-H. and Chand, Reenal R. and Na, H-H. and Lee, J-H. and Kim, I-S. (2014) A smart system to determine and control for the process parameters in pipeline welding. Materials Science Forum, 773-77 . pp. 758-766. ISSN 1662-9752

K

Kim, B.H. and Wata, Joji and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2015) Numerical and experimental studies on the PTO system of a novel floating wave energy converter. Renewable Energy, 79 . pp. 111-121. ISSN 0960-1481

Kim, I.C. and Wata, Joji and Ahmed, Mohammed R. and Lee, Y.H. (2012) CFD study of a ducted cross flow turbine concept for high efficiency tidal current energy extraction. [Conference Proceedings]

Kim, K.P. and Ahmed, Mohammed R. and Lee, Y.H. (2009) Conceptual design of a 100kW energy-integrated type bi-directional tidal current turbine. [Conference Proceedings]

Kim, K.P. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Efficiency improvement of a tidal current turbine utilizing a larger area of channel. Renewable Energy, 48 . pp. 557-564. ISSN 0960-1481

Kini, P.G. and Bansal, Ramesh C. and Aithal, R.S. (2006) Impact of voltage unbalance on the performance of three-phase induction motor. The South Pacific Journal of Natural Sciences, 24 (1). pp. 45-50. ISSN 1013-9877

Kumar, Ajal and Deo, Ravin N. (2006) Wind regime in the proximity of the 20 kW experimental turbine site at Nabua, Fiji. UNSPECIFIED.

Kumar, Ajal and Nair, Krishnam (2014) Wind energy potential, resource assessment and economics of wind power around Qamu, Navua, Fiji. International Journal of Wind and Renewable Energy, 3 (1). pp. 1-6. ISSN 2277-3975

Kumar, Ajal and Weir, Anthony D. (2008) Wind power in Fiji: a preliminary analysis of the Butoni wind farm. UNSPECIFIED.

Kumar, L. and Singh, Anirudh (2012) Remote sensing and GIS techniques for the assessment of biofuel and biomass energy resources. [Conference Proceedings]

Kumar, Mahendra and Mario, R. (2004) Renewable energy potential in Fiji: a path for sustainable development? Fijian Studies: A Journal of Contemporary Fiji, 2 (1). pp. 54-77. ISSN 1728-7456

Kumar, Rahul R. and Reddy, Hamendra M. and Mehta, Utkal V. (2014) Study of Transients in Grid Coupled Synchronous Generators. [Creative Works]

M

Mamun, Kabir and Islam, F M Rabiul and Maung Than Oo, Amanullah (2017) Smart Energy Grid Design for Island Countries-Challenges and Opportunities. [Book, Journal, Proceedings Edited]

Mamun, Kabir and Stokes, J. (2014) Development of a semi automated dual feed unit to produce FGM coatings using the HVOF thermal spray process. The South Pacific Journal of Natural and Applied Sciences, 32 (1). pp. 18-26. ISSN 1838-837X

Mehta, Utkal V. (2014) Stabilizing relay experiment for modeling of unstable processes with large time delay. Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, 228 (6). pp. 359-368. ISSN 0959-6518

Mohanty, Manoranjan (2012) New renewable energy sources, green energy development and climate change: implications to Pacific Island countries. Management of Environmental Quality: An International Journal, 23 (3). pp. 264-274. ISSN 1477-7835

Michael D.K., Michael D.k. and Tong, L. and Luo, Q. and Sun, X. and Katzos, A. and Rispler, A.R. (2009) Failure of stitched composite L-joints under tensile loading: experiment and simulation. Journal of Reinforced Plastics & Composites, 28 (6). pp. 715-742. ISSN 0731-6844

N

Narayan, Sumesh and Ahmed, Mohammed R. and Lee, Y.H. (2010) Experimental study on the pendulor wave energy extractor. [Conference Proceedings]

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on densification behaviour in forming of sintered plain carbon steel performs. [Conference Proceedings]

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2012) Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting. Materials Research, 15 (2). pp. 291-299. ISSN 1516-1439

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Deo, Ravin N. (2016) Corrosion behaviour of sinter forged aluminium composites during hot deformation. The Journal of Corrosion Science and Engineering, 18 (26). pp. 1-20. ISSN 1466-8858

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. (2013) Workability behaviour of Fe-C-Mo steel preforms during cold forging. Journal of Iron and Steel Research: International, 20 (9). pp. 126-130. ISSN 1006-706X

Nuttall, Peter and Newell, Alison and Bola, Amelia and Kaitu’u, John and Prasad, Biman C. (2014) Policy and financing - why is sea transport currently invisible in the search for a low carbon future for Pacific Island countries? Frontiers in Marine Science, 1 (20). pp. 1-10. ISSN NA

Nuttall, Peter and Newell, Alison and Prasad, Biman C. and Veitayaki, Joeli and Holland, Elisabeth A. (2014) A review of sustainable sea - transport for Oceania: providing context for renewable energy shipping for the Pacific. Marine Policy, 43 . pp. 283-287. ISSN 0308-597X

O

Onwubolu, Godfrey C. (2006) Performance-based optimization of multi-pass face milling operations using tribes. International Journal of Machine Tools and Manufacture, 46 (7-8). pp. 717-727. ISSN 0890-6955

Onwubolu, Godfrey C. (2006) Selection of drilling operations parameters for optimal tool loading using integrated response surface methodology: a tribes approach. International Journal of Production Research, 44 (5). pp. 959-980. ISSN 0020-7543

Onwubolu, Godfrey C. and Jannif, Nayzel I. and Tazil, Mohammed and Singh, Anirudh (2006) Mobile robotic platform controller with an effective data communication protocol. Proceedings of the Institution of Mechanical Engineers Part B - Journal of Engineering Manufacture, 220 (7). pp. 1175-1188. ISSN 0954-4054

P

Patel, Sandeep and Ram, Krishnil R. and Ahmed, Mohammed R. (2011) Effect of partial blockage of air duct outlet on the performance of an OWC device. [Conference Proceedings]

Patel, Sandeep K. and Prasad, Deepak D. and Ahmed, Mohammed R. (2014) Computational studies on the effect of geometric parameters on the performance of a solar chimney power plant. Energy Conversion and Management, 77 . pp. 424-431. ISSN 0196-8904

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2012) Effect of partial blockage of air duct outlet on performance of OWC device. Journal of Central South University, 19 (3). pp. 748-754. ISSN 2095-2899

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2013) Effect of turbine section orientation on the performance characteristics of an oscillating water column device. Experimental Thermal and Fluid Science, 44 . pp. 642-648. ISSN 0894-1777

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. and Lee, Y.H. (2011) Performance studies on an oscillating water column employing a savonius rotor. Science China Technological Sciences, 54 (7). pp. 1674-1679. ISSN 1674-7321

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance studies on an oscillating water column employing a savonius rotor. [Conference Proceedings]

Pisaturo, M. and Cirrincione, Maurizio and Senatore, A. (2015) Multiple constrained MPC design for automotive dry clutch engagement. IEEE/ASME Transactions on Mechatronics, 20 (1). pp. 469-480. ISSN 1083-4435

Prasad, Biman C. and Veitayaki, Joeli and Holland, Elisabeth A. and Nuttall, Peter and Newell, Alison and Bola, Amelia and Kaitu’u, John (2013) Sustainable sea transport research programme: toward a research - based programme of investigation for Oceania. The Journal of Pacific Studies, 33 (1). pp. 78-94. ISSN 1011-3029

Prasad, D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2009) Effect of front guide nozzle shape on the flow characteristics in an augmentation channel of a direct drive turbine for wave power generation. [Conference Proceedings]

Prasad, D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Effect of front guide nozzle shape on the flow characteristics in an augmentation channel of a direct drive turbine for wave power generation. Science China Technological Sciences, 53 (1). pp. 46-51. ISSN 1674-7321

Prasad, D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Flow characteristics and primary energy conversion in an augmentation channel of a direct drive turbine for wave power generation. [Conference Proceedings]

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2014) Flow and performance characteristics of a direct drive turbine for wave power generation. Ocean Engineering, 81 . pp. 39-49. ISSN 0029-8018

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Performance studies on a direct drive turbine for wave power generation in a numerical wave tank. [Conference Proceedings]

Prasad, Deepak D. and Lee, Y.H. (2012) Maximizing primary energy conversion in a direct drive turbine for wave power extraction. International Journal of Mechanic Systems Engineering, 2 (4). pp. 132-140. ISSN 2225-7403

Prasad, Shivneel and Bijay, Pritika and Schulte, V. (2013) An overview of energy policy and security in the Pacific region. In: Global Energy Policy and Security. Lecture Notes in Energy, 16 . Springer, London, UK, pp. 277-292. ISBN Print 9781447152859 Online 9781447152866

Pucci, M. and Cirrincione, Maurizio and Greco, L. and Testa, C. and Vitale, G. (2014) Marine current turbine generator system with induction machine growing neural gas (GNG) MPPT based on sensorless sea speed estimation. [Conference Proceedings]

R

Ram, Krishnil R. and Ahmed, Mohammed R. and Narayan, Sumesh and Nakavulevu, P. and Lee, Y.H. (2010) Near shore wave energy assessment in the western coastal region of Fiji. [Conference Proceedings]

Ram, Krishnil R. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2010) Experimental studies on the flow characteristics in an inclined bend-free OWC device with parallel walls. [Conference Proceedings]

Ram, Krishnil R. and Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2010) Experimental studies on the flow characteristics in an oscillating water column device. Journal of Mechanical Science and Technology, 24 (10). pp. 2043-2050. ISSN 1738-494X

Ram, Krishnil R. and Goundar, Jai and Prasad, Deepak D. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Optimization of hydrofoils for horizontal axis marine current turbines using genetic algorithm. [Conference Proceedings]

Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2012) Airfoil optimization for small wind turbines using multi objective genetic algorithm. [Conference Proceedings]

Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Low reynolds number airfoil optimization for wind turbine applications using genetic algorithm. Journal of Renewable and Sustainable Energy, 5 (052007). pp. 1-15. ISSN 1941-7012

Ram, Krishnil R. and Sharan, Roneel and Ahmed, Mohammed R. (2013) A regional university perspective on engineering education of multi - cultural freshman students from South Pacific countries. [Conference Proceedings]

Reddy, Sandeep K. and Ahmed, Mohammed R. (2014) In - situ wave resource assessment near Taveuni, Fiji Islands. Journal of Renewable and Sustainable Energy, 6 (042001). pp. 1-13. ISSN NA

Renard, Y. and Raturi, Atul K. (2010) Mid-term review report on Pacific SIDS energy ecosystems and sustainable livelihoods initiative: managing the ecosystem implications of energy policies in the Pacific Island states. [Professional and Technical Reports]

S

Sharan, Roneel (2014) Development of a remote automatic weather station with a PC - based data logger. International Journal of Hybrid Information Technology, 7 (1). pp. 233-240. ISSN 1738-9968

Sharan, Roneel and Onwubolu, G.C. (2014) Automating the process of work - piece recognition and location for a pick - and - place robot in a SFMS. International Journal of Image, Graphics and Signal Processing, 6 (4). pp. 9-17. ISSN 2074-9074

Sharan, Roneel and Onwubolu, G.C. (2013) Simulating the arm movements of a stepper motor controlled pick - and - place robot using the stepper motor model. International Journal of Advanced Science and Technology, 60 . pp. 59-66. ISSN 2005-4238

Sharan, Roneel and Onwubolu, Godfrey C. (2006) Development of a vision-based pick-and-place robot. [Conference Proceedings]

Sharan, Roneel and Onwubolu, Godfrey C. (2011) Measurement of end-milling burr using image processing techniques. Journal of Engineering Manufacture, 225 (3). pp. 448-452. ISSN 0954-4054

Sharan, Roneel and Onwubolu, Godfrey C. A low - cost force measurement solution applicable for robotic grippers. [Conference Proceedings]

Sharma, Alokanand and Onwubolu, Godfrey C. (2007) A hybrid approach for modeling high dimensional medical data. [Conference Proceedings]

Sharma, Kaushik and Ahmed, Mohammed R. (2016) Wind energy resource assessment for the Fiji Islands: Kadavu Island and Suva Peninsula. Renewable Energy, 89 . pp. 168-180. ISSN 0960-1481

Singh, Anirudh (2012) All about renewable energy: a basic renewable energy kit for decision makers. USP Project DIREKT, University of the South Pacific, Suva, Fiji. ISBN 9789820108974

Singh, Anirudh (2011) Basic awareness in renewable energy for decision-makers. UNSPECIFIED. (Unpublished)

Singh, Anirudh (2012) Renewable energy in the Pacific Island countries: resources, policies and issues. Management of Environmental Quality: An International Journal, 23 (3). pp. 254-263. ISSN 1477-7835

Singh, Anirudh (2012) Sustainable energy solutions for rural Fiji – lessons learnt from the past. UNSPECIFIED.

Singh, Anirudh and Bijay, Pritika (2011) Biofuels in Fiji and the Pacific – research, production and possibilities. UNSPECIFIED. (Unpublished)

Singh, Anirudh and Bijay, Pritika (2011) Renewable energy developments in the Pacific – present status and future prospects. UNSPECIFIED. (Unpublished)

Singh, Anirudh and Fifita, S. and Mario, R. and Bijay, Pritika (2012) Sustainable energy development in the Pacific – the evolution of energy frameworks and national policies. [Conference Proceedings]

Singh, Naznil and Sivan, Rajneel and Sotoa, Manuialouolaga and Faizal, Mohammed and Ahmed, Mohammed R. (2016) Experimental studies on parallel wavy channel heat exchangers with varying channel inclination angles. Experimental Thermal and Fluid Science, 75 . pp. 173-182. ISSN 0894-1777

Singh, Pranil J. and Khurma, Jagjit R. and Singh, Anirudh (2010) Preparation, characterisation, engine performance and emission characteristics of coconut oil based hybrid fuels. Renewable Energy, 35 (9). pp. 2065-2070. ISSN 0960-1481

Singh, R.K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2011) Blade design and performance testing of a small wind turbine for low wind speed applications. [Conference Proceedings]

Singh, Ronit K. and Ahmed, Mohammed R. (2013) Blade design and performance testing of a small wind turbine rotor for low wind speed applications. Renewable Energy, 50 . pp. 812-819. ISSN 0960-1481

Singh, Ronit K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2010) Design and testing of a low Reynolds number airfoil for small horizontal axis wind turbines. [Conference Proceedings]

Singh, Ronit K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2012) Design of a low Reynolds number airfoil for small horizontal axis wind turbines. Renewable Energy, 42 . pp. 66-76. ISSN 0960-1481

Syed, T. and Das, S.R. and Biswas, S.N. and Assaf, Mansour and Petriu, E. (2013) On automated test system for asymmetric digital subscriber line equipment. World Journal of Engineering, 10 (4). pp. 387-394. ISSN 1708-5284

V

Venugopalan, V. and Hasan, M.N. and Ahmed, Mohammed R. (2004) Numerical simulation of turboramjet engines for performance studies. Modeling, Measurement and Control, Series B, 73 (6). pp. 35-54. ISSN 1259-5969

Verbruggen, A. and Fischedick, M. and Moomaw, W. and Weir, Anthony D. and Nadai, A. and Nilsson, L.J. and Nyboer, J. and Sathaye, J. (2010) Renewable energy costs, potentials, barriers: conceptual issues. Energy Policy, 38 (2). pp. 850-861. ISSN 0301-4215

W

Wata, Joji and Faizal, Mohammed and Talu, Boniface and Vanawalu, Lesia and Puamau, Sotia and Ahmed, Mohammed R. (2011) Studies on a low Reynolds number airfoil for small wind turbine applications. Science China Technological Sciences, 54 (7). pp. 1684-1688. ISSN 1674-7321

Wata, Joji V. and Faizal, Mohammed and Talu, Boniface and Vanawalu, Lesia and Puamau, Sotia and Ahmed, Mohammed R. (2011) Studies on a low Reynolds number airfoil for small wind turbine applications. Science China Technological Sciences, 54 (7). pp. 1684-1688. ISSN 1674-7321

Weir, Anthony D. and Prasad, Shivneel (2013) Adoption of climate - smart technologies: the case of rural solar electricity in the Pacific Islands. In: Climate-Smart Technologies: Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Springer, Berlin, pp. 379-392. ISBN Print 9783642377525 Online 9783642377532

Weir, Anthony D. and Prasad, Shivneel and Bijay, Pritika (2013) The role of renewable energy in the Pacific Islands. UNSPECIFIED.

Z

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a direct drive turbine for wave energy conversion using CFD. [Conference Proceedings] (Unpublished)

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a savonius type wave energy converter using CFD. [Conference Proceedings]

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2009) Performance analysis of a wave energy converter using numerical simulation technique. [Conference Proceedings]

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a wave energy converter using numerical simulation technique. Science China Technological Sciences, 53 (1). pp. 13-18. ISSN 1674-7321

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance evaluation of a direct drive wave energy converter using CFD. [Conference Proceedings]

This list was generated on Wed Aug 23 02:12:06 2017 FJT.