USP Electronic Research Repository

Items where Author is "Ahmed, Mohammed R."

Group by: Item Type | No Grouping
Number of items: 123.

Conference Proceedings

Tuicolo, Aseli and Gounder, Kavitesh and Ahmed, Mohammed R. (2023) Design of a new rocket stove and performance testing with different varieties of wood. [Conference Proceedings]

Prasad, Deepak D. and Pesamino, Marisilina and Cavuilati, Amenatave and Ram, Krishnil R. and Ahmed, Mohammed R. (2023) Effect Of Upstream Deflector Plate Position On The Performance Of Savonius Rotors. [Conference Proceedings]

Costa, M. and Prasad, R. and Ali, M. and Khan, Mohammad G.M. and De Ramon N'Yeurt, Antoine and Ahmed, Mohammed R. (2022) Variation of power output from an OTEC power plant based on longterm sea surface temperature data analysis. [Conference Proceedings]

Joyce, Naomi and Deo, Ashneel and Ahmed, Mohammed R. (2020) Tidal Energy Feasibility Study and Turbine Design for Malolo Island. [Conference Proceedings]

Kumar, Avikesh and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2020) Time-Variations of Wave-Energy and Forecasting Power Availability using Different Techniques. [Conference Proceedings]

Arzu, Arieni and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2020) Wind Speed Forecasting using Regression, Time Series and Neural Network Models: A Case Study of Suva. [Conference Proceedings]

Prasad, Deepak D. and Taika, Nelson and Tekieta, Kaatee and Ahmed, Mohammed R. and Lee, Young H. (2019) Experimental investigation on the performance of Savonius rotors for wave energy conversion. [Conference Proceedings]

Singh, Krishneel and Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Wind Energy Resource Assessment for Tokelau with Accurate Weibull Parameters. [Conference Proceedings]

Arzu, Arieni and Kutty, Saiyad S. and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2018) Wind speed forecasting using regression, time series and neural network models: a case study of Kiribati. [Conference Proceedings]

Goundar, Jai and Prasad, Deepak D. and Ahmed, Mohammed R. (2018) Design of a ducted cross - flow turbine for marine current energy extraction. [Conference Proceedings]

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2018) Effect of oscillating water column chamber inclination on the performance of a Savonius Rotor. [Conference Proceedings]

Kutty, Saiyad S. and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2018) Wind Characteristics during Cyclones in Suva, Fiji, for the Last Six Cyclone Seasons. [Conference Proceedings]

Arzu, Arieni and Kutty, Saiyad Shamsher and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2018) Wind Speed Forecasting using Regression, Time Series and Neural Network Models: A Case Study of Kiribati. [Conference Proceedings]

Ram, Krishnil R. and Ahmed, Mohammed R. and Lee, Y.H. (2017) Experimental Study of Wave Forces on an Offshore Wind Turbine Tower Model. [Conference Proceedings]

Goundar, Jai and Ahmed, Mohammed R. (2014) Design and Optimization of a Horizontal Axis Marine Current Turbine. [Conference Proceedings]

Hoasirao, Victor and Faizal, Mohammed and Ahmed, Mohammed R. (2014) Effect of phase shift of a sinusoidal plate heat exchanger on the heat transfer characteristics. [Conference Proceedings]

Ahmed, Mohammed R. (2014) Overview of Ocean Energy Research at USP. [Conference Proceedings]

Ram, Krishnil R. and Goundar, Jai and Prasad, Deepak D. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Optimization of hydrofoils for horizontal axis marine current turbines using genetic algorithm. [Conference Proceedings]

Ram, Krishnil R. and Sharan, Roneel and Ahmed, Mohammed R. (2013) A regional university perspective on engineering education of multi - cultural freshman students from South Pacific countries. [Conference Proceedings]

Goundar, Jai and Prasad, Deepak D. and Ahmed, Mohammed R. (2013) Design and performance testing of a ducted savonius turbine for marine current energy extraction. [Conference Proceedings]

Kim, I.C. and Wata, Joji and Ahmed, Mohammed R. and Lee, Y.H. (2012) CFD study of a ducted cross flow turbine concept for high efficiency tidal current energy extraction. [Conference Proceedings]

Faizal, Mohammed and Kim, B.H. and Kim, C.G. and Lee, N.J. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Experimental studies on the PTO system of a novel floating wave energy converter. [Conference Proceedings]

Ahmed, Mohammed R. (2012) Overview of wave and tidal current energy research in the South Pacific. [Conference Proceedings]

Ahmed, Mohammed R. and Nabolaniwaqa, Epeli (2012) Performance improvement of a wind turbine blade designed for low wind speeds with a passive trailing edge flap. [Conference Proceedings]

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Performance studies on a direct drive turbine for wave power generation in a numerical wave tank. [Conference Proceedings]

Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2012) Airfoil optimization for small wind turbines using multi objective genetic algorithm. [Conference Proceedings]

Goundar, Jai and Narayan, Sumesh and Ahmed, Mohammed R. (2012) Design of a horizontal axis wind turbine for Fiji. [Conference Proceedings]

Singh, R.K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2011) Blade design and performance testing of a small wind turbine for low wind speed applications. [Conference Proceedings]

Patel, Sandeep and Ram, Krishnil R. and Ahmed, Mohammed R. (2011) Effect of partial blockage of air duct outlet on the performance of an OWC device. [Conference Proceedings]

Ahmed, Mohammed R. and Faizal, Mohammed and Lee, Y.H. (2011) Employing multiple arrays of savonius rotors for maximum energy extraction from the orbital motion in ocean waves. [Conference Proceedings]

Goundar, Jai and Ahmed, Mohammed R. (2011) Experimental and numerical studies on hydrofoils for horizontal axis marine current turbines. [Conference Proceedings]

Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2011) Experimental studies on a botttom-hinged pendulor wave energy converter in a wave channel. [Conference Proceedings]

Chandra, Vineet V. and Ahmed, Mohammed R. (2011) Wind effect on cooling load estimation. [Conference Proceedings]

Ahmed, Mohammed R. (2010) Blade sections for wind turbine and tidal current turbine applications - current trends and future challenges. [Conference Proceedings]

Singh, Ronit K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2010) Design and testing of a low Reynolds number airfoil for small horizontal axis wind turbines. [Conference Proceedings]

Ahmed, Mohammed R. and Narayan, Sumesh and Zullah, M.A. and Lee, Y.H. (2010) Experimental and numerical studies on a low Reynolds number airfoil for wind turbine blades. [Conference Proceedings]

Ram, Krishnil R. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2010) Experimental studies on the flow characteristics in an inclined bend-free OWC device with parallel walls. [Conference Proceedings]

Narayan, Sumesh and Ahmed, Mohammed R. and Lee, Y.H. (2010) Experimental study on the pendulor wave energy extractor. [Conference Proceedings]

Faizal, Mohammed and Ahmed, Mohammed R. (2010) Flash evaporation desalination for applications in OTEC plants. [Conference Proceedings]

Prasad, D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Flow characteristics and primary energy conversion in an augmentation channel of a direct drive turbine for wave power generation. [Conference Proceedings]

Faizal, Mohammed and Ahmed, Mohammed R. (2010) Heat transfer studies on corrugated plate heat exchanger for OTEC applications. [Conference Proceedings]

Ram, Krishnil R. and Ahmed, Mohammed R. and Narayan, Sumesh and Nakavulevu, P. and Lee, Y.H. (2010) Near shore wave energy assessment in the western coastal region of Fiji. [Conference Proceedings]

Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2010) Numerical and experimental studies on hydrofoils for marine current turbines. [Conference Proceedings]

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a direct drive turbine for wave energy conversion using CFD. [Conference Proceedings] (Unpublished)

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a savonius type wave energy converter using CFD. [Conference Proceedings]

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance evaluation of a direct drive wave energy converter using CFD. [Conference Proceedings]

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance studies on an oscillating water column employing a savonius rotor. [Conference Proceedings]

Kim, K.P. and Ahmed, Mohammed R. and Lee, Y.H. (2009) Conceptual design of a 100kW energy-integrated type bi-directional tidal current turbine. [Conference Proceedings]

Prasad, D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2009) Effect of front guide nozzle shape on the flow characteristics in an augmentation channel of a direct drive turbine for wave power generation. [Conference Proceedings]

Zullah, M.A. and Prasad, D. and Ahmed, Mohammed R. and Lee, Y.H. (2009) Performance analysis of a wave energy converter using numerical simulation technique. [Conference Proceedings]

Ahmed, Mohammed R. and Faizal, Mohammed and Prasad, K. and Lee, Y.H. and Kim, C.G. and Cho, Y.J. (2008) Exploiting the orbital motion of water particles for energy extraction from the waves. [Conference Proceedings]

Ahmed, Mohammed R. and Takasaki, T. and Kohama, Y. (2006) Experiments on the aerodynamics of a cambered airfoil in ground effect. [Conference Proceedings]

Ahmed, Mohammed R. (2004) Flow over thick airfoils in ground effect - an investigation on the influence of camber. [Conference Proceedings]

Ahmed, Mohammed R. (2004) Flow over thick airfoils in ground effect - an investigation on the influence of camber. [Conference Proceedings]

Ahmed, Mohammed R. and Sharma, S.D. (2004) An experimental study of turbulent mixing enhancement with a 10o deflection of the annular stream. [Conference Proceedings]

Journal Article

Prasad, Reemal D. and Ahmed, Mohammed R. (2023) Experimental evaluation of the performance and power output enhancement of a divergent solar chimney power plant by increasing the chimney height. Frontiers in Energy Research, 11 . NA. ISSN 2296-598X

Khan, Mohammad G.M. and Ahmed, Mohammed R. (2023) Bayesian method for estimating Weibull parameters for wind resource assessment in the tropical region: a comparison between two-parameter and three - parameter Weibull distributions. Wind Energy Science, 8 (8). pp. 1277-1298. ISSN 2366-7621

Sisi, Misel J. and Ahmed, Mohammed R. and Rohindra, David (2022) Experimental investigation on the estimation of the viscous thermodynamic activation energy parameters of vegetable oils extracted from Cocos nucifera, Calophyllum inophyllum and Canarium indicum. Sustainable Energy Technologies and Assessments, 53 . NA. ISSN 2213-1388

Singh, Krishneel and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2022) Wind energy resource assessment for Cook Islands with accurate estimation of Weibull parameters using frequentist and Bayesian methods. IEEE Access, 10 . pp. 25935-25953. ISSN 2169-3536

Weerakoon, A.H.S. and Kim, B.H. and Cho, Y.J. and Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2021) Design optimization of a novel vertical augmentation channel housing a cross - flow turbine and performance evaluation as a wave energy converter. Renewable Energy, 180 . pp. 1300-1314. ISSN 0960-1481

Talama, Fatonga and Kutty, Saiyad S. and Kumar, Ajal and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2020) Assessment of wind energy potential for Tuvalu with accurate estimation of Weibull parameters. Energy Exploration and Exploitation, 38 (5). pp. 1742-1773. ISSN 0144-5987

Sisi, Misel J. and Ahmed, Mohammed R. and Rohindra, David (2020) Performance and emission characteristics of a diesel engine employing straight vegetable oils from Vanuatu as fuels. Advances in Mechanical Engineering, 12 (9). NA. ISSN 1687-8140

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2020) Effect of oscillating water column chamber inclination on the performance of a Savonius rotor. Journal of Offshore Mechanics and Arctic Engineering, 142 (4). 042002-1. ISSN 0892-7219

Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Estimation of different wind characteristics parameters and accurate wind resource assessment for Kadavu, Fiji. AIMS Energy, 7 (6). pp. 760-791. ISSN 2333-8326

Singh, Krishneel and Bule, Leonie and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Wind energy resource assessment for Vanuatu with accurate estimation of Weibull parameters. Energy Exploration and Exploitation, 37 (6). pp. 1804-1832. ISSN 0144-5987

Ahmed, Mohammed R. and Nabolaniwaqa, Epeli (2019) Performance studies on a wind turbine blade section for low wind speeds with a Gurney flap. Journal of Energy Resources Technology - Transactions of ASME, 141 (11). NA. ISSN 0195-0738

Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Wind energy resource assessment for Suva, Fiji, with accurate Weibull parameters. Energy Exploration and Exploitation, 37 (3). pp. 1009-1038. ISSN 0144-5987

Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2019) Design and Optimization of a Ducted Marine Current Savonius Turbine for Gun-barrel Passage, Fiji. Journal of Offshore Mechanics and Arctic Engineering, 141 (2). 021901-1. ISSN 0892-7219

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2018) Performance improvement of an oscillating water column wave energy converter by geometry modification. Journal of Mechanical Science and Technology, 32 (12). pp. 5729-5736. ISSN 1738-494X

Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2018) Design and optimization of airfoils and a 20 kW wind turbine using multi-objective genetic algorithm and HARP_Opt code. Renewable Energy, NA . NA. ISSN 0960-1481

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. and Sharma, R.N. (2018) On the simulation of regular waves in a numerical wave tank. Advances and Applications in Fluid Mechanics, 21 (3). pp. 325-341. ISSN 0973-4686

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2018) Studies on the performance of Savonius rotors in a numerical wave tank. Ocean Engineering, 158 . pp. 29-37. ISSN 0029-8018

Prasad, Deepak D. and Kim, C.G. and Kang, H.G. and Ahmed, Mohammed R. and Lee, Y.H. (2017) Performance and flow characteristics of single and a novel double oscillating water column devices. Journal of Mechanical Science and Technology, 31 (12). pp. 5879-5886. ISSN 1738-494X

Ahmed, Mohammed R. and Patel, Sandeep K. (2017) Computational and experimental studies on solar chimney power plants for power generation in Pacific Island Countries. Energy Conversion and Management, 149 . pp. 61-78. ISSN 0196-8904

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. and Sharma, Rajnish N. (2017) Validation of a Piston Type Wave-maker Using Numerical Wave Tank. Ocean Engineering, 131 . pp. 57-67. ISSN 0029-8018

Aukitino, Tiaon and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2017) Wind energy resource assessment for Kiribati with a comparison of different methods of determining Weibull parameters. Energy Conversion and Management, TBC . pp. 641-660. ISSN 0196-8904

Singh, Naznil and Sivan, Rajneel and Sotoa, Manuialouolaga and Faizal, Mohammed and Ahmed, Mohammed R. (2016) Experimental studies on parallel wavy channel heat exchangers with varying channel inclination angles. Experimental Thermal and Fluid Science, 75 . pp. 173-182. ISSN 0894-1777

Sharma, Kaushik and Ahmed, Mohammed R. (2016) Wind energy resource assessment for the Fiji Islands: Kadavu Island and Suva Peninsula. Renewable Energy, 89 . pp. 168-180. ISSN 0960-1481

Ram, Krishnil R. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2016) Experimental studies on the flow characteristics in an inclined bend-free OWC device. Journal of Ocean Engineering and Science, 1 (1). pp. 77-83. ISSN 2468-0133

Kim, B.H. and Wata, Joji and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2015) Numerical and experimental studies on the PTO system of a novel floating wave energy converter. Renewable Energy, 79 . pp. 111-121. ISSN 0960-1481

Ram, Krishnil R. and Narayan, Sumesh and Ahmed, Mohammed R. and Nakavulevu, P. and Lee, Y.H. (2014) In Situ near shore wave resource assessment in the Fiji Islands. Energy for Sustainable Development, 23 . pp. 170-178. ISSN 0973-0826

Reddy, Sandeep K. and Ahmed, Mohammed R. (2014) In - situ wave resource assessment near Taveuni, Fiji Islands. Journal of Renewable and Sustainable Energy, 6 (042001). pp. 1-13. ISSN NA

Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2014) Flow and performance characteristics of a direct drive turbine for wave power generation. Ocean Engineering, 81 . pp. 39-49. ISSN 0029-8018

Goundar, Jai and Ahmed, Mohammed R. (2014) Marine current energy resource assessment and design of a marine current turbine for Fiji. Renewable Energy, 65 . pp. 14-22. ISSN 0960-1481

Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Young-Ho (2014) A design outline for floating point absorber wave energy converters. Advances in Mechanical Engineering, 2014 . pp. 1-18. ISSN 1687-8132

Chandra, Vineet V. and Ahmed, Mohammed R. (2014) Experimental and computational studies on a steam jet refrigeration system with constant area and variable area ejectors. Energy Conversion and Management, 79 . pp. 377-386. ISSN 0196-8904

Patel, Sandeep K. and Prasad, Deepak D. and Ahmed, Mohammed R. (2014) Computational studies on the effect of geometric parameters on the performance of a solar chimney power plant. Energy Conversion and Management, 77 . pp. 424-431. ISSN 0196-8904

Goundar, Jai and Ahmed, Mohammed R. (2013) Design of a horizontal axis tidal current turbine. Applied Energy, 111 . pp. 161-174. ISSN 0306-2619

Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Low reynolds number airfoil optimization for wind turbine applications using genetic algorithm. Journal of Renewable and Sustainable Energy, 5 (052007). pp. 1-15. ISSN 1941-7012

Ahmed, Mohammed R. and Faizal, Mohammed and Lee, Y.H. (2013) Optimization of blade curvature and inter-rotor spacing of Savonius rotors for maximum wave energy extraction. Ocean Engineering, 65 . pp. 32-38. ISSN 0029-8018

Faizal, Mohammed and Ahmed, Mohammed R. (2013) Experimental studies on a closed cycle demonstration OTEC plant working on small temperature difference. Renewable Energy, 51 . pp. 234-240. ISSN 0960-1481

Singh, Ronit K. and Ahmed, Mohammed R. (2013) Blade design and performance testing of a small wind turbine rotor for low wind speed applications. Renewable Energy, 50 . pp. 812-819. ISSN 0960-1481

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2013) Effect of turbine section orientation on the performance characteristics of an oscillating water column device. Experimental Thermal and Fluid Science, 44 . pp. 642-648. ISSN 0894-1777

Kim, K.P. and Ahmed, Mohammed R. and Lee, Y.H. (2012) Efficiency improvement of a tidal current turbine utilizing a larger area of channel. Renewable Energy, 48 . pp. 557-564. ISSN 0960-1481

Goundar, Jai and Ahmed, Mohammed R. and Lee, Y.H. (2012) Numerical and experimental studies on hydrofoils for marine current turbines. Renewable Energy, 42 . pp. 173-179. ISSN 0960-1481

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2012) Effect of partial blockage of air duct outlet on performance of OWC device. Journal of Central South University, 19 (3). pp. 748-754. ISSN 2095-2899

Faizal, Mohammed and Ahmed, Mohammed R. (2012) Experimental studies on a corrugated plate heat exchanger for small temperature difference applications. Experimental Thermal and Fluid Science, 36 . pp. 242-248. ISSN 0894-1777

Ahmed, Mohammed R. (2012) Blade sections for wind turbine and tidal current turbine applications – current status and future challenges. International Journal of Energy Research, 36 (7). pp. 829-844. ISSN 0363-907X

Singh, Ronit K. and Ahmed, Mohammed R. and Zullah, M.A. and Lee, Y.H. (2012) Design of a low Reynolds number airfoil for small horizontal axis wind turbines. Renewable Energy, 42 . pp. 66-76. ISSN 0960-1481

Wata, Joji and Faizal, Mohammed and Talu, Boniface and Vanawalu, Lesia and Puamau, Sotia and Ahmed, Mohammed R. (2011) Studies on a low Reynolds number airfoil for small wind turbine applications. Science China Technological Sciences, 54 (7). pp. 1684-1688. ISSN 1674-7321

Ahmed, Mohammed R. and Narayan, Sumesh and Zullah, M.A. and Lee, Y.H. (2011) Experimental and numerical studies on a low reynolds number airfoil for wind turbine blades. JSME International (prev. Series B) Journal of Fluid Science and Technology, 6 (3). pp. 357-371. ISSN 1340-8054

Faizal, Mohammed and Ahmed, Mohammed R. and Kim, C.G. and Lee, Y.H. (2011) Experimental studies of water wave characteristics in a wave channel. International Journal of Fluid Mechanics Research, 38 (2). pp. 167-178. ISSN 1064-2277

Faizal, Mohammed and Ahmed, Mohammed R. (2011) Experimental studies on a corrugated plate heat exchanger for OTEC applications, experimental thermal and fluid science. Experimental Thermal and Fluid Science, 36 . pp. 242-248. ISSN 0894-1777

Faizal, Mohammed and Ahmed, Mohammed R. (2011) On the ocean heat budget and ocean thermal energy conversion. International Journal of Energy Research, 35 (13). pp. 1119-1144. ISSN 0363-907X

Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. and Lee, Y.H. (2011) Performance studies on an oscillating water column employing a savonius rotor. Science China Technological Sciences, 54 (7). pp. 1674-1679. ISSN 1674-7321

Wata, Joji V. and Faizal, Mohammed and Talu, Boniface and Vanawalu, Lesia and Puamau, Sotia and Ahmed, Mohammed R. (2011) Studies on a low Reynolds number airfoil for small wind turbine applications. Science China Technological Sciences, 54 (7). pp. 1684-1688. ISSN 1674-7321

Prasad, Deepak D. and Zullah, M.A. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Effect of front guide nozzle shape on the flow characteristics in an augmentation channel of a direct drive turbine for wave power generation. Science China Technological Sciences, 53 (1). pp. 46-51. ISSN 1674-7321

Ram, Krishnil R. and Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2010) Experimental studies on the flow characteristics in an oscillating water column device. Journal of Mechanical Science and Technology, 24 (10). pp. 2043-2050. ISSN 1738-494X

Ahmed, Mohammed R. and Faizal, Mohammed and Prasad, Krishnil and Cho, Y.J. and Kim, C.G. and Lee, Y.H. (2010) Exploiting the orbital motion of water particles for energy extraction from waves. Journal of Mechanical Science and Technology, 24 (4). pp. 943-949. ISSN 1738-494X

Faizal, Mohammed and Ahmed, Mohammed R. and Lee, Y.H. (2010) On utilizing the orbital motion in water waves to drive a Savonius rotor. Renewable Energy, 35 (1). pp. 164-169. ISSN 0960-1481

Zullah, M.A. and Prasad, Deepak D. and Ahmed, Mohammed R. and Lee, Y.H. (2010) Performance analysis of a wave energy converter using numerical simulation technique. Science China Technological Sciences, 53 (1). pp. 13-18. ISSN 1674-7321

Prasad, Deepak D. and Uliate, Tuputa and Ahmed, Mohammed R. (2009) Wind loads on low-rise building models with different roof configurations. International Journal of Fluid Mechanics Research, 36 (3). pp. 231-243. ISSN 1064-2277

Ahmed, Mohammed R. and Talama, Fatonga (2008) Flow characteristics and local heat transfer rates for a heated circular cylinder in a crossflow of air. International Journal of Fluid Mechanics Research, 35 (1). pp. 76-93. ISSN 1064-2277

Ahmed, Mohammed R. and Takasaki, T. and Kohama, Y. (2007) Aerodynamics of a NACA4412 airfoil in ground effect. American Institute of Aeronautics and Astronautics (AIAA) Journal, 45 (1). pp. 37-47. ISSN 0001-1452

Ahmed, Mohammed R. and Sharma, S.D. (2006) Turbulent mixing enhancement with a 20 degrees chute mixer. Experimental Thermal and Fluid Science, 30 (3). pp. 161-174. ISSN 0894-1777

Ahmed, Mohammed R. (2005) Aerodynamics of a cambered airfoil in ground effect. International Journal of Fluid Mechanics Research, 32 (2). pp. 157-183. ISSN 1064-2277

Ahmed, Mohammed R. and Sharma, S.D. (2005) Turbulent mixing enhancement with a 10o chute mixer. Aircraft Engineering and Aerospace Technology, 77 (5). pp. 404-414. ISSN 0002-2667

Ahmed, Mohammed R. and Sharma, S.D. (2005) An investigation on the aerodynamics of a symmetrical airfoil in ground effect. Experimental Thermal and Fluid Science, 29 (6). pp. 633-647. ISSN 0894-1777

Venugopalan, V. and Hasan, M.N. and Ahmed, Mohammed R. (2004) Numerical simulation of turboramjet engines for performance studies. Modeling, Measurement and Control, Series B, 73 (6). pp. 35-54. ISSN 1259-5969

Professional and Technical Reports

Ahmed, Mohammed R. (2018) Feasibility Study & Design of a Seawater Air-Conditioning System for USP Tuvalu Campus. [Professional and Technical Reports]

Other

Ahmed, Mohammed R. (2024) Sample wave data obtained using ANN. UNSPECIFIED. (Unpublished)

Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2023) Sample Tonga Data - wind speeds and direction, Temperature. UNSPECIFIED. (Unpublished)

Ahmed, Mohammed R. (2016) Sample Data for Pentecost, Rakiraki and Rarotonga (Appendix 3). UNSPECIFIED.

This list was generated on Thu Nov 7 07:00:07 2024 +12.