Items where Author is "Ananthanarayanan, Rajeshkannan"

Conference Proceedings

Khan, Mohammed N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2019) Workability of sintered Aluminium composite preforms of varying Cu and TiC contents during cold deformation. [Conference Proceedings]

Ananthanarayanan, Rajeshkannan and Hoasirao, Victor (2014) Some aspects on cold deformation characteristics of sintered Fe-0.8%C-1%Si-0.4%Cu steel preforms. [Conference Proceedings]

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on densification behaviour in forming of sintered plain carbon steel performs. [Conference Proceedings]

Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. (2009) Evaluation of Deformation and Densification Behavior in Sintered Fe-0.8%C-1.0%Mo Steel Preforms. [Conference Proceedings]

Journal Article

Macarthur, John and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Seenivasagam, Devi Rengamani and Swami, Kamendra Narayan (2021) Process audit in a beverage industry - line efficiency and downtime analysis, a case study. International Journal of Productivity and Quality Management, 34 (1). pp. 1-19. ISSN 1746-6474

Jeevanantham, A.K. and Chaitanya, S.V. and Ananthanarayanan, Rajeshkannan (2020) Matrix - based tolerance analysis for multi - component selective assembly with geometric and dimensional features using genetic algorithm. International Journal of Productivity and Quality Management, 30 (4). pp. 527-560. ISSN 1746-6474

Singh, Shivneel and Ananthanarayanan, Rajeshkannan and Firoz, Shahiz and Jeevanantham, A.K. (2020) Effect of normalizing on the tensile strength, shrinkage and surface roughness of PLA plastic. Materials Today: Proceedings, 24 (2). pp. 1174-1182. ISSN 2214-7853

Ananthanarayanan, Rajeshkannan and Guyot, Edouard and Jeevanantham, A.K. (2020) Effect of preform Geometry and Molybdenum addition on work hardening behavior of Fe-0.8%C steel preforms during cold upsetting. Materials Today: Proceedings, 22 (4). pp. 1822-1828. ISSN 2214-7853

Khan, M.N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Jeevanantham, A.K. (2020) Formability of Sintered Al, Al-Cu and Al-Cu-TiC Composites during Cold Upsetting. Materials Today: Proceedings, 22 (4). 2499 - 2508. ISSN 2214-7853

Khan, M.N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Jeevanantham, A.K. (2020) Formability of Sintered Al, Al-Cu and Al-Cu-TiC composites during cold upsetting. Materials Today: Proceedings, 22 (4). pp. 2499-2508. ISSN 2214-7853

Ananthanarayanan, Rajeshkannan and Ali, Mohammed and Prakash, R. and Prasad, Reemal D. and Jeevanantham, A.K. and Jayaram, Karthick (2020) Optimizing the process parameters in plasma arc cutting using Taguchi approach for the case industry in Fiji. Materials Today: Proceedings, 24 (2). pp. 1122-1131. ISSN 2214-7853

Jeevanantham, A.K. and Seenivasagam, Devi R. and Ananthanarayanan, Rajeshkannan (2020) Strain hardening analysis and modelling for sintered Al-Cu-TiC preforms with varying process parameters during cold upsetting. Journal of Materials Research and Technology, 9 (5). pp. 12007-12018. ISSN 2238-7854

Kolivuso, Manasa and Ananthanarayanan, Rajeshkannan and Jeevanantham, A.K. (2020) Study on computational and conventional method of determining volume of material removal in CNC milling process. Materials Today: Proceedings, 22 (4). pp. 1360-1368. ISSN 2214-7853

J., Sreedharan and A.K., Jeevanantham and Ananthanarayanan, Rajeshkannan (2019) Multi - objective optimization for multi - stage sequential plastic injection molding with plating process using RSM and PCA - based weighted - GRA. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, NA . NA. ISSN 0954-4062

Ananthanarayanan, Rajeshkannan and Sharma, Jaishneel and Jehanno, Nicholas and Seenivasagam, Devi R. (2019) Study of barriers to the advancement of CNC machining in view of Fiji manufacturing industry using hybrid MCDA approach. Journal of Multi-Criteria Decision Analysis, NA . NA. ISSN 1057-9214

Sharma, Jaishneel and Ananthanarayanan, Rajeshkannan and Sharma, Arnit and Seenivasagam, Devi R. (2019) Some aspects on the sustainable process design in a timber mill using the design for manufacturability/sustainability. International Journal of Sustainable Engineering, NA . NA. ISSN 1939-7038

Khan, Mohammed N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2019) Influence of process parameters on the workability characteristics of sintered Al and Al – Cu composites during cold deformation. AIMS Materials Science, 6 (3). pp. 441-453. ISSN 2372-0468

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh and Jeevanantham, A.K. (2019) Modelling and analysis of strain hardening characteristics of sintered steel preforms under cold forging. AIMS Materials Science, 6 (1). pp. 63-79. ISSN 2372-0468

Ananthanarayanan, Rajeshkannan and Ahmed, Zoher and Prasad, Avneet and Narayan, Sumesh (2019) Strain hardening analysis and modelling of its parameters for sintered Al and Al-1%C preforms during cold upsetting. Journal of Materials Research and Technology, TBC . pp. 1-9. ISSN 2238-7854

A.K., Jeevanantham and S.V., Chaitanya and Ananthanarayanan, Rajeshkannan (2019) Tolerance analysis in selective assembly of multiple component features to control assembly variation using matrix model and genetic algorithm. International Journal of Precision Engineering and Manufacturing, 20 (10). pp. 1801-1815. ISSN 2234-7593

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2018) Densification behaviour of sintered aluminum composites during hot deformation. AIMS Materials Science, 5 (5). pp. 902-915. ISSN 2372-0468

Thirumalai, Muthusamy and A.K., Jeevanantham and Ravuri, Kishore and Ananthanarayanan, Rajeshkannan (2018) Formability and Force Analysis of Steel Foils in Single Point Micro-Incremental Forming (SPMIF). Materials Today: Proceedings, 5 . pp. 12772-12781. ISSN 2214-7853

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2018) Forming limit analysis of Molybdenum reinforced carbon steels. Key Engineering Materials, 777 . pp. 306-310. ISSN 1013-9826

Ananthanarayanan, Rajeshkannan and Shanmugam, S. (2018) Study on densification behaviour under cold forging of sintered high carbon alloy steels. Key Engineering Materials, 777 . pp. 311-315. ISSN 1013-9826

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2017) Effect of titanium carbide addition on the workability behavior of powder metallurgy aluminum preforms during hot deformation. Materials Physics and Mechanics, 32 (2). pp. 165-177. ISSN 1605-8119

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2017) Hardness, tensile and impact behaviour of hot forged aluminium metal matrix composites. Journal of Materials Research and Technology, 6 (3). pp. 213-219. ISSN 2238-7854

Ananthanarayanan, Rajeshkannan (2017) Some Studies on the Bulging Characteristics of Cold-Upset Steel Preforms. Materials Science Forum, 890 . pp. 367-370. ISSN 0255-5476

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2017) Studies on formability of sintered aluminum composites during hot deformation using strain hardening parameters. Journal of Materials Research and Technology, 6 (2). pp. 101-107. ISSN 2238-7854

Ananthanarayanan, Rajeshkannan (2017) Study on the Mechanism of Pores Deformation in Aluminium Composites under Hot and Cold Upsetting Processes. Materials Science Forum, 890 . pp. 8-11. ISSN 0255-5476

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Deo, Ravin N. (2016) Corrosion behaviour of sinter forged aluminium composites during hot deformation. The Journal of Corrosion Science and Engineering, 18 (26). pp. 1-20. ISSN 1466-8858

Mehta, Utkal V. and Ananthanarayanan, Rajeshkannan (2015) Optimal autotuning of nonminimum phase processes under relay control. Proceedings of the Institution of Mechanical Engineers Part I-Journal of Systems and Control Engineering, Online . pp. 1-14. ISSN 0959-6518

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2015) Workability behavior of powder metallurgy aluminum reinforced carbide composites during hot deformation. Materials and Manufacturing Processes, 1 . pp. 1-15. ISSN 1042-6914

Ananthanarayanan, Rajeshkannan and Rai, S. N. and Chand, Miteshwar and Prasad, N and Ram, R and Naicker, M (2014) Densification behaviour of sintered - forged aluminium composite preforms. Journal of Engineering Manufacture, 228 (3). pp. 441-449. ISSN 0954-4054

Ananthanarayanan, Rajeshkannan and Sharma, Alokanand (2014) Densification and corrosion studies of as - sintered - swaged Al composite preforms. Advanced Materials Research, 911 . pp. 67-71. ISSN 1022-6680

Ananthanarayanan, Rajeshkannan and Sharma, Alokanand and Devi, RS (2014) Evaluation of matrix and geometric strain hardening of axial deformed sintered Fe-0.75%C preform. Advanced Materials Research, 911 . pp. 143-147. ISSN 1022-6680

Ananthanarayanan, Rajeshkannan and Mehta, Utkal V. (2014) Deformation study of sintered iron – carbon – silicon – copper steel compacts during cold forging. Materials and Manufacturing Processes, 29 (4). pp. 442-447. ISSN 1042-6914

Saini, Harsh and Raicar, Gaurav and Sharma, Alokanand and Lal, Sunil P. and Dehzangi, A. and Ananthanarayanan, Rajeshkannan and Lyons, J. and Biswas, N. and Paliwal, K.K. (2014) Protein structural class prediction via k - separated bigrams using position specific scoring matrix. Journal of Advanced Computational Intelligence and Intelligent Informatics, 18 (4). pp. 474-479. ISSN 1343-0130

Ananthanarayanan, Rajeshkannan and Rengamani, D.S. and Sharma, Alokanand (2014) Some aspects on geometric and matrix work-hardening characteristics of sintered cold forged copper alloy performs. Materials Research, 17 (1). pp. 196-202. ISSN 1516-1439

Ananthanarayanan, Rajeshkannan and Sharma, Bibhya N. (2014) Study of Pore Closure Mechanism of Aluminium Composite Processed through Powder Metallurgy Route. Advanced Materials Research, 911 . pp. 50-54. ISSN 1022-6680

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2014) Workability Behaviour of Powder Metallurgy Aluminium Composites. Journal of Powder Technology, 1 . pp. 1-7. ISSN 2090-7710

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2014) Workability studies of sintered aluminum composites during hot deformation. Proceedings of the Institution of Mechanical Engineers Part B - Journal of Engineering Manufacture, 230 (3). pp. 494-504. ISSN 0954-4054

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2013) Influence of carbon content on workability behavior in the formation of sintered plain carbon steel preforms. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 105-111. ISSN 0268-3768

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2013) Phenomenon of instantaneous work hardening characteristics of sintered cold deformed Cu alloy preforms. Advanced Materials Research, 651 . pp. 295-301. ISSN 1022-6680

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. (2013) Workability behaviour of Fe-C-Mo steel preforms during cold forging. Journal of Iron and Steel Research: International, 20 (9). pp. 126-130. ISSN 1006-706X

Sharma, Alokanand and Paliwal, K.K. and Imoto, S. and Miyano, S. and Sharma, V. and Ananthanarayanan, Rajeshkannan (2013) A feature selection method using fixed-point algorithm for DNA microarray gene expression data. International Journal of Knowledge Based and Intelligent Engineering Systems, 18 (1). pp. 55-59. ISSN 1327-2314

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2012) Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting. Materials Research, 15 (2). pp. 291-299. ISSN 1516-1439

Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. and Nayanasamy, R. and Narayan, Sumesh (2012) Some studies on sintered cold deformed plain carbon alloy steels. Materials & Design, 33 . pp. 115-120. ISSN 0264-1275

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Densification behavior in forming of sintered iron – 0.35% carbon powder metallurgy preform during cold upsetting. Materials and Design, 32 (2). pp. 1006-1013. ISSN 0264-1257

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on densification behaviour in forming of sintered plain carbon steel preforms. International Journal of Advanced Manufacturing Technology, 225 (7). pp. 1141-1151. ISSN 0268-3768

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on strain hardening behaviour of sintered plain carbon steel preforms. Journal of Iron and Steel Research: International, 18 (9). pp. 33-40. ISSN 1006-706X

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Strain hardening behaviour in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting. Materials Research, 14 (4). pp. 1-7. ISSN 1516-1439

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Workability studies in forming of sintered Fe-0.35C powder metallurgy preform during cold upsetting. Journal of Iron and Steel Research: International, 18 (12). pp. 71-78. ISSN 1006-706X

Ananthanarayanan, Rajeshkannan (2010) Deformation behaviour of sintered silicon–copper steel preforms of various aspect ratios during cold upsetting. The International Journal of Advanced Manufacturing Technology, 50 (5-8). pp. 509-515. ISSN 0268-3768

Ananthanarayanan, Rajeshkannan (2010) Workability studies on cold upsetting of sintered copper alloy preforms. Materials Research, 13 (4). pp. 457-464. ISSN 1516-1439

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2009) Strain hardening behaviour in sintered Fe–0.8%C–1.0%Si–0.8%Cu powder metallurgy preform during cold upsetting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (12). pp. 1567-1574. ISSN 0954-4054

Other

Sharma, Jaishneel and Ananthanarayanan, Rajeshkannan (2019) Improved automotive oil filter wrench. UNSPECIFIED.

Ananthanarayanan, Rajeshkannan and Devi, Rengamani S. (2015) Densification and workability study on non - linear deformation of aluminium composite during hot swaging. UNSPECIFIED.

Ananthanarayanan, Rajeshkannan and Devi, Rengamani S. and Rao, Dinesh K. (2015) Modelling the mechanical strengthening parameter of sintered Fe-0.8%C preforms under cold upsetting. UNSPECIFIED.

Ananthanarayanan, Rajeshkannan and Devi, Rengamani S. (2015) Powder metallurgy a potential green manufacturing processes: a review. UNSPECIFIED.

Ananthanarayanan, Rajeshkannan and Khan, Mohammed and Jeevanantham, A.K. (2013) Influence of barreling in deformation and densification behaviour of sintered powder forged preforms. UNSPECIFIED.

Ananthanarayanan, Rajeshkannan and Prawin, PM.OSA. (2009) Phenomenon of strain hardening in sintered high carbon steel preforms during cold upsetting. UNSPECIFIED.