USP Electronic Research Repository

Items where Author is "Narayan, Sumesh"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 36.

Journal Article

Chand, Avikash K. and Nasrekani, Farid M. and Mamun, Kabir and Narayan, Sumesh (2023) Design and optimization of a rack and pinion type WEC using an auxiliary vibrating system. International Journal of Renewable Energy Development, 12 (2). pp. 277-287. ISSN 2252-4940

Edward, Kaamil and Mamun, Kabir and Narayan, Sumesh and Assaf, Mansour and Rohindra, David and Rathnayake, Upaka (2023) State - of - the - Art Graphene synthesis methods and environmental concerns. Applied and Environmental Soil Science, NA . NA. ISSN 1687-7667

Prasad, Kushal A. and Chand, Aneesh A. and Kumar, Nallapaneni and Narayan, Sumesh and Mamun, Kabir (2022) A critical review of power take - off wave energy technology leading to the conceptual design of a novel wave - plus - photon energy harvester for Island/Coastal Communities’ energy needs. Sustainability, 14 (4). NA. ISSN 2071-1050

Macarthur, John and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Seenivasagam, Devi Rengamani and Swami, Kamendra Narayan (2021) Process audit in a beverage industry - line efficiency and downtime analysis, a case study. International Journal of Productivity and Quality Management, 34 (1). pp. 1-19. ISSN 1746-6474

Khan, M.N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Jeevanantham, A.K. (2020) Formability of Sintered Al, Al-Cu and Al-Cu-TiC Composites during Cold Upsetting. Materials Today: Proceedings, 22 (4). 2499 - 2508. ISSN 2214-7853

Khan, M.N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Jeevanantham, A.K. (2020) Formability of Sintered Al, Al-Cu and Al-Cu-TiC composites during cold upsetting. Materials Today: Proceedings, 22 (4). pp. 2499-2508. ISSN 2214-7853

Khan, Mohammed N. and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2019) Influence of process parameters on the workability characteristics of sintered Al and Al – Cu composites during cold deformation. AIMS Materials Science, 6 (3). pp. 441-453. ISSN 2372-0468

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh and Jeevanantham, A.K. (2019) Modelling and analysis of strain hardening characteristics of sintered steel preforms under cold forging. AIMS Materials Science, 6 (1). pp. 63-79. ISSN 2372-0468

Ananthanarayanan, Rajeshkannan and Ahmed, Zoher and Prasad, Avneet and Narayan, Sumesh (2019) Strain hardening analysis and modelling of its parameters for sintered Al and Al-1%C preforms during cold upsetting. Journal of Materials Research and Technology, TBC . pp. 1-9. ISSN 2238-7854

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2018) Densification behaviour of sintered aluminum composites during hot deformation. AIMS Materials Science, 5 (5). pp. 902-915. ISSN 2372-0468

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2018) Forming limit analysis of Molybdenum reinforced carbon steels. Key Engineering Materials, 777 . pp. 306-310. ISSN 1013-9826

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2017) Effect of titanium carbide addition on the workability behavior of powder metallurgy aluminum preforms during hot deformation. Materials Physics and Mechanics, 32 (2). pp. 165-177. ISSN 1605-8119

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2017) Hardness, tensile and impact behaviour of hot forged aluminium metal matrix composites. Journal of Materials Research and Technology, 6 (3). pp. 213-219. ISSN 2238-7854

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2017) Studies on formability of sintered aluminum composites during hot deformation using strain hardening parameters. Journal of Materials Research and Technology, 6 (2). pp. 101-107. ISSN 2238-7854

Deo, Ashneel and Goundar, Jai and Narayan, Sumesh and Chettiar, Niranjwan (2016) Design and performance analysis of micro wind turbine for Fiji. International Journal of Information and Electronics Engineering, 6 (2016). pp. 37-40. ISSN 2010-3719

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Deo, Ravin N. (2016) Corrosion behaviour of sinter forged aluminium composites during hot deformation. The Journal of Corrosion Science and Engineering, 18 (26). pp. 1-20. ISSN 1466-8858

Narayan, Sumesh and Deo, Ashneel and Chettiar, Niranjwan and Goundar, Jai (2016) Experimental Studies on a Pendular wave Energy Extractor in a wave Channel. International Journal of Electronics and Electrical Engineering, 4 (2). pp. 162-165. ISSN 2301-380x

Narayan, Sumesh and Goundar, Jai and Chettiar, Niranjwan and Deo, Ashneel (2016) Design and Performance Analysis of Micro Wind Turbine for Fiji. International Journal of Information and Electronics Engineering, 6 (1). pp. 37-40. ISSN 2010-3719

Goundar, Jai and Chettiar, Niranjwan and Narayan, Sumesh and Deo, Ashneel and Prasad, Deepak D. (2015) Design of a ducted cross flow turbine for Fiji. Applied Mechanics and Materials, 772 (1). pp. 561-565. ISSN 1660-9336

Chettiar, Niranjwan and Narayan, Sumesh and Goundar, Jai and Deo, Ashneel (2015) Design of a gorlov turbine for marine current energy extraction. Applied Mechanics and Materials, 772 . pp. 556-560. ISSN 1660-9336

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2015) Workability behavior of powder metallurgy aluminum reinforced carbide composites during hot deformation. Materials and Manufacturing Processes, 1 . pp. 1-15. ISSN 1042-6914

Ram, Krishnil R. and Narayan, Sumesh and Ahmed, Mohammed R. and Nakavulevu, P. and Lee, Y.H. (2014) In Situ near shore wave resource assessment in the Fiji Islands. Energy for Sustainable Development, 23 . pp. 170-178. ISSN 0973-0826

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2014) Workability Behaviour of Powder Metallurgy Aluminium Composites. Journal of Powder Technology, 1 . pp. 1-7. ISSN 2090-7710

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2014) Workability studies of sintered aluminum composites during hot deformation. Proceedings of the Institution of Mechanical Engineers Part B - Journal of Engineering Manufacture, 230 (3). pp. 494-504. ISSN 0954-4054

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2013) Influence of carbon content on workability behavior in the formation of sintered plain carbon steel preforms. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 105-111. ISSN 0268-3768

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2013) Phenomenon of instantaneous work hardening characteristics of sintered cold deformed Cu alloy preforms. Advanced Materials Research, 651 . pp. 295-301. ISSN 1022-6680

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. (2013) Workability behaviour of Fe-C-Mo steel preforms during cold forging. Journal of Iron and Steel Research: International, 20 (9). pp. 126-130. ISSN 1006-706X

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2012) Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting. Materials Research, 15 (2). pp. 291-299. ISSN 1516-1439

Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. and Nayanasamy, R. and Narayan, Sumesh (2012) Some studies on sintered cold deformed plain carbon alloy steels. Materials & Design, 33 . pp. 115-120. ISSN 0264-1275

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Densification behavior in forming of sintered iron – 0.35% carbon powder metallurgy preform during cold upsetting. Materials and Design, 32 (2). pp. 1006-1013. ISSN 0264-1257

Ahmed, Mohammed R. and Narayan, Sumesh and Zullah, M.A. and Lee, Y.H. (2011) Experimental and numerical studies on a low reynolds number airfoil for wind turbine blades. JSME International (prev. Series B) Journal of Fluid Science and Technology, 6 (3). pp. 357-371. ISSN 1340-8054

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on densification behaviour in forming of sintered plain carbon steel preforms. International Journal of Advanced Manufacturing Technology, 225 (7). pp. 1141-1151. ISSN 0268-3768

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on strain hardening behaviour of sintered plain carbon steel preforms. Journal of Iron and Steel Research: International, 18 (9). pp. 33-40. ISSN 1006-706X

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Strain hardening behaviour in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting. Materials Research, 14 (4). pp. 1-7. ISSN 1516-1439

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Workability studies in forming of sintered Fe-0.35C powder metallurgy preform during cold upsetting. Journal of Iron and Steel Research: International, 18 (12). pp. 71-78. ISSN 1006-706X

Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2009) Strain hardening behaviour in sintered Fe–0.8%C–1.0%Si–0.8%Cu powder metallurgy preform during cold upsetting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (12). pp. 1567-1574. ISSN 0954-4054

This list was generated on Fri Mar 29 04:31:28 2024 +12.