|
|
|
|
|
Items where Division is "School of Engineering and Physics" and Year is 2013 |
||
|
Number of items: 67. BookChand, Praneel (2013) PC based drilling machine: Data acquisition and control board. LAP LAMBERT Academic Publishing, Germany. ISBN 978-3-659-36700-7 Book ChapterAssaf, Mansour and Williams, K.M. and Das, S.R. and Morton, S. (2013) Use of session initiation protocol in multimedia communications. In: Applied Cyber-Physical Systems. Springer, New York, NY. ISBN ISBN-10: 1461473357 ISBN-13: 978-1461473350 Azid, Sheikh I. and Jokhan, Anjeela D. (2013) Mapping of organisations involved in energy research activities in the Pacific Island region, their research projects, budgets and research gaps. In: Climate Smart Technologies - Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Climate Change Management . Springer, Heidelberg, New York, London, pp. 89-96. ISBN Print 978-3-642-37752-5 Online 978-3-642-37753-2 Bijay, Pritika and Filho, W.L. and Schulte, V. (2013) Understanding the links between climate change and disaster management in Pacific island countries. In: Climate Change and Disaster Risk Management. Springer-Verlag Berlin Heidelberg, Germany, pp. 55-69. ISBN Print 9783642311093 Online 9783642311109 Bijay, Pritika and Schulte, V. and Prasad, Shivneel (2013) An overview of climate - smart technologies in the Pacific region. In: Climate-Smart Technologies-Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Climate Change Management . Springer-Verlag Berlin Heidelberg , Germany, pp. 3-18. ISBN 9783642377525 online 9783642377532 Bijay, Pritika and Singh, Anirudh (2013) Viability of using cassava as feedstock for bioethanol production in Fiji (Ch 35). In: Climate-Smart Technologies - Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation responses. Climate Change Management . Springer, Heidelberg, Berlin, New York, pp. 459-472. ISBN Print: 978-3-642-37752-5 Online: 978-3-642-37753-2 Dehzangi, A. and Paliwal, K.K. and Lyons, J. and Sharma, Alokanand and Sattar, A. (2013) Enhancing protein fold prediction accuracy using evolutionary and structural features. In: Lecture Notes in Computer Science. Lecture Notes in Computer Science, 7986 . Springer Berlin Heidelberg, Switzerland, pp. 196-207. ISBN Print 9783642391583 Online 9783642391590 Dehzangi, A. and Paliwal, K.K. and Lyons, J. and Sharma, Alokanand and Sattar, A. (2013) Exploring potential discriminatory information embedded in PSSM to enhance protein structural class prediction accuracy. In: Lecture Notes in Bioinformatics. Lecture Notes in Computer Science, 7986 . Springer Berlin Heidelberg, Switzerland , pp. 208-219. ISBN Print 9783642391583 Online 9783642391590 Dehzangi, A. and Paliwal, K.K. and Sharma, Alokanand and Lyons, J. and Sattar, A. (2013) Protein fold recognition using an overlapping segmentation approach and a mixture of feature extraction models. In: Lecture Notes in Bioinformatics. Lecture Notes in Computer Science, 8272 . Springer International Publishing, Switzerland, pp. 32-43. ISBN Print 9783319036793 Online 9783319036809 Kumar, L. and Singh, Anirudh (2013) Remote sensing and GIS technologies for the assessment of biofuel and biomass energy resources. In: Climate-Smart Technologies - Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Climate Change Management . Springer, Heidelberg, Berlin, New York, London, pp. 283-294. ISBN Print: 978-3-642-37782-5 Online: 978-3-642-37753-2 Prasad, Shivneel and Bijay, Pritika and Schulte, V. (2013) An overview of energy policy and security in the Pacific region. In: Global Energy Policy and Security. Lecture Notes in Energy, 16 . Springer, London, UK, pp. 277-292. ISBN Print 9781447152859 Online 9781447152866 Prasad, Shivneel and Kumar, Ajal and Raturi, Atul K. (2013) Optimization of a stand - alone renewable energy system for a small load requirement. In: Climate-Smart Technologies: Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Springer, Berlin, Heidelberg, pp. 615-628. ISBN 9783642377525 Singh, Anirudh and Fifita, S. and Mario, Rupeni and Bijay, Pritika (2013) Sustainable energy development in the Pacific: The evolution of energy frameworks and national policies. In: Climate-Smart Technologies - Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaption Responses. Climate Change Management . Springer, Heidelberg, New York, London, pp. 129-140. ISBN 978-3-642-37752-5 Surroop, D. and Mohee, R. and Jeetah, P. and Filho, W.L. and Schulte, V. and Gottwald, J. and Corbin, N. and Persaud, V. and Rogers, T. and Singh, Anirudh and Bijay, Pritika and Ramnanan, J. and Haraksingh, I. and Emmandie, D. (2013) Strategies development by DIREKT for the Small Island Developing States to enhance renewable energy utilisation. In: Climate-Smart Technologies: Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Climate Change Management . Springer, Heidelberg, Berlin, New York, London, pp. 235-244. ISBN 978-3-642-37782-5 Conference ProceedingsBiswas, S.N. and Hasan, T. and Dasgupta, S. and Das, S.R. and Groza, V.Z. and Petriu, E.M. and Assaf, Mansour (2013) Compressed video watermarking technique. [Conference Proceedings] Das, S.R. and Shaw, D. and Biswas, S.N. and Assaf, Mansour and Morton, S. and Ozkarahan, I. and Petriu, E.M. and Groza, V.Z. (2013) Data compression using mixed cascade of nonlinear logic. [Conference Proceedings] Goundar, Jai and Prasad, Deepak D. and Ahmed, Mohammed R. (2013) Design and performance testing of a ducted savonius turbine for marine current energy extraction. [Conference Proceedings] Koripella, R. and Das, S.R. and Morton, S. and Biswas, S.N. and Ozkarahan, I. and Assaf, Mansour (2013) High speed S - box architecture for advanced encryption standard. [Conference Proceedings] Kumar, Shiu and Chandra, Abel and Lee, Seong (2013) Estimation of Packet Delay Components for Time Synchronization in Wireless Sensor Networks. [Conference Proceedings] Mehta, Utkal V. (2013) Fast fourier transform for estimating process frequency response. [Conference Proceedings] Mohammadi, Ali and Djerdir, Abdesslem and Bouquain, David and Bouriot, Beatrice and Khaburi, Davood (2013) Fault sensitive modeling and diagnosis of PEM fuel cell for automotive applications. [Conference Proceedings] Parwal, A.K. and Parwal, G. and Sharma, Alokanand and Sharma, A.K. (2013) Design and implementation of fuzzy based control system for natural gas pipes system based on LabVIEW. [Conference Proceedings] Ram, Krishnil R. and Goundar, Jai and Prasad, Deepak D. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Optimization of hydrofoils for horizontal axis marine current turbines using genetic algorithm. [Conference Proceedings] Ram, Krishnil R. and Sharan, Roneel and Ahmed, Mohammed R. (2013) A regional university perspective on engineering education of multi - cultural freshman students from South Pacific countries. [Conference Proceedings] Vatchkov, Gantcho L. (2013) Online detection of deviation in performance of multichannel dynamical processes. [Conference Proceedings] Journal ArticleAhmed, Mohammed R. and Faizal, Mohammed and Lee, Y.H. (2013) Optimization of blade curvature and inter-rotor spacing of Savonius rotors for maximum wave energy extraction. Ocean Engineering, 65 . pp. 32-38. ISSN 0029-8018 Ananthanarayanan, Rajeshkannan and Narayan, Sumesh (2013) Phenomenon of instantaneous work hardening characteristics of sintered cold deformed Cu alloy preforms. Advanced Materials Research, 651 . pp. 295-301. ISSN 1022-6680 Assaf, Mansour and Khan, S. and Das, S.R. and Biswas, S.N. (2013) Energy efficient optimization of wireless embedded sensor networks. World Journal of Engineering, 10 (3). pp. 273-282. ISSN 1708-5284 Carter, B.A. and Zhang, K. and Norman, R. and Kumar, V.V. and Kumar, Sushil (2013) On the occurrence of equatorial F-region irregularities during solar minimum using radio occultation measurements. Journal of Geophysical Research: Space Physics, 118 . pp. 1-13. ISSN 0148-0227 Chand, Praneel and Carnegie, D.A. (2013) Mapping and exploration in a hierarchical heterogeneous multi-robot system using limited capability robots. Robotics and Autonomous Systems, 61 (6). pp. 565-579. ISSN 0921-8890 Chand, Reenal R. and Kim, I-S. and Lee, J-H. and Kim, J-S. (2013) Numerical and experiment study of residual stress and strain in multi - pass GMA welding. Advanced Materials Research, 717 . pp. 403-409. ISSN 1022-6680 Chand, Reenal R. and Kim, I-S. and Lee, J-H. and Kim, J-S. (2013) Prediction welding quality in multi - pass welding process using Mahalanobis distance method. Applied Mechanics and Materials, 291-29 . pp. 2688-2693. ISSN 1660-9336 Chand, Reenal R. and Kim, I. and Lee, J.P. and Kim, Y.S. (2013) Numerical and experimental study of residual stress and strain in multi - pass GMA welding. Journal of Achievement in Materials and Manufacturing Engineering, 57 (1). pp. 31-37. ISSN 1734-8412 Cirrincione, Maurizio and Accetta, A. and Pucci , Marcello and Vitale, Gianpaolo (2013) MRAS Speed Observer for High-Performance Linear Induction Motor Drives Based on Linear Neural Network. IEEE Transactions on Power Electronics, 28 (1). pp. 123-134. ISSN 0885-8993 Das, S.R. and Biswas, S.N. and Petriu, E.M. and Groza, V.Z. and Assaf, Mansour and Nayak, A.R. (2013) Fault - tolerance in VLSI systems design using data compression under constraints of failure probabilities–overview and current status. World Journal of Engineering, 10 (1). pp. 73-84. ISSN 1708-5284 Das, S.R. and Jun-Feng, L. and Nayak, A. and Assaf, Mansour and Petriu, E.M. and Biswas, S.N. (2013) Circuit architecture test verification based on hardware software co-design with ModelSim. IETE Journal of Research, 59 (2). pp. 132-140. ISSN 0377-2063 Dehzangi, A. and Paliwal, K.K. and Sharma, Alokanand and Dehzangi, O. and Sattar, A. (2013) A combination of feature extraction methods with an ensemble of different classifiers for protein structural class prediction problem. IEEE/ACM Transactions on Computational Biology and Bioinformatics, N/A . p. 1. ISSN 1557-9964 Faizal, Mohammed and Ahmed, Mohammed R. (2013) Experimental studies on a closed cycle demonstration OTEC plant working on small temperature difference. Renewable Energy, 51 . pp. 234-240. ISSN 0960-1481 Goundar, Jai and Ahmed, Mohammed R. (2013) Design of a horizontal axis tidal current turbine. Applied Energy, 111 . pp. 161-174. ISSN 0306-2619 Jannif, Nayzel I. and Chand, Praneel and Singh, Ravinesh (2013) Development of a hierarchical computer numerical control milling machine control unit using low-end PIC microcontrollers. Journal of Engineering Manufacture, 227 (6). pp. 922-926. ISSN 0954-4054 Kumar, Abhikesh and Kumar, Sushil and Hayakawa, M. and Menk, F. (2013) Subionospheric VLF perturbations observed at low latitude associated with earthquake from Indonesia region. Journal of Atmospheric and Solar-Terrestrial Physics, 102 . pp. 71-80. ISSN 1364-6826 Kumar, Ajal and Nair, Krishnam (2013) Wind power potential at Benau, Savusavu, Vanua Levu, Fiji. International Journal of Energy, Information and Communications, 4 (1). pp. 51-62. ISSN 2093-9655 Kumar, Sushil and Kumar, Abhikesh (2013) Lightning - associated VLF perturbations observed at low latitude: occurrence and scattering characteristics. Earth Planets Space, 65 (1). pp. 25-37. ISSN 1343-8832 Kumar, V. and Protat, A. and May, P. and Jakob, C. and Penide, G. and Kumar, Sushil and Davies, L. (2013) On the effects of large-scale environment and surface types on convective cloud characteristics over Darwin, Australia. Monthly Weather Review, 141 (4). pp. 1358-1374. ISSN 0027-0644 Maurya, A.K. and Singh, R. and Veenadhari, B. and Kumar, Sushil and Singh, A.K. (2013) Sub - ionospheric very low frequency perturbations associated with the 12 May 2008 M = 7.9 Wenchuan earthquake. Natural Hazards and Earth System Science, 13 . pp. 2331-2336. ISSN 1561-8633 Nand, Ravinesh and Raturi, Atul K. (2013) Feasibility study of a grid connected photovoltaic system for the central region of Fiji. Applied Solar Energy, 49 (2). pp. 110-115. ISSN 0003-701X Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2013) Influence of carbon content on workability behavior in the formation of sintered plain carbon steel preforms. The International Journal of Advanced Manufacturing Technology, 64 (1-4). pp. 105-111. ISSN 0268-3768 Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. (2013) Workability behaviour of Fe-C-Mo steel preforms during cold forging. Journal of Iron and Steel Research: International, 20 (9). pp. 126-130. ISSN 1006-706X Parwal, A.K. and Parwal, G. and Sharma, Alokanand and Khan, M.A. (2013) Implementation of Fuzzy Technique based on LabVIEW for Control Gas System using USB 6009. International Journal of Control and Automation, 6 (3). pp. 365-374. ISSN 2005-4297 Patel, Sandeep K. and Ram, Krishnil R. and Ahmed, Mohammed R. (2013) Effect of turbine section orientation on the performance characteristics of an oscillating water column device. Experimental Thermal and Fluid Science, 44 . pp. 642-648. ISSN 0894-1777 Ram, Krishnil R. and Lal, Sunil P. and Ahmed, Mohammed R. (2013) Low reynolds number airfoil optimization for wind turbine applications using genetic algorithm. Journal of Renewable and Sustainable Energy, 5 (052007). pp. 1-15. ISSN 1941-7012 Salut, M.M. and Cohen, M.B. and Ali, M.A.M. and Graf, K.L. and Cotts, B.R.T. and Kumar, Sushil (2013) On the relationship between lightning peak current and early VLF perturbations. Journal of Geophysical Research: Space Physics, 118 (11). pp. 7272-7282. ISSN 0148-0227 Sharan, Roneel and Onwubolu, G.C. (2013) Simulating the arm movements of a stepper motor controlled pick - and - place robot using the stepper motor model. International Journal of Advanced Science and Technology, 60 . pp. 59-66. ISSN 2005-4238 Sharma, Alokanand and Lyons, James and Dehzangi, Abdollah and Paliwal, K.K. (2013) A feature extraction technique using bi-gram probabilities of position specific scoring matrix for protein fold recognition. Journal of Theoretical Biology, 320 . pp. 41-46. ISSN 0022-5193 Sharma, Alokanand and Paliwal, K.K. (2013) Linear discriminant analysis for the small sample size problem: an overview. International Journal of Machine Learning and Cybernetics, 5 . pp. 1-12. ISSN 1868-8071 Sharma, Alokanand and Paliwal, K.K. and Dehzangi, Abdollah and Lyons, James and Imoto, S. and Miyano, S. (2013) A strategy to select suitable physicochemical at attributes of amino acids for protein fold recognition. BMC Bioinformatics, 14 (233). pp. 1-11. ISSN 1471-2105 Sharma, Alokanand and Paliwal, K.K. and Imoto, S. and Miyano, S. (2013) A feature selection method using improved regularized linear discriminant analysis. Machine Vision and Applications, Novemb . ?-?. ISSN 0932-8092 Sharma, Alokanand and Paliwal, K.K. and Imoto, S. and Miyano, S. and Sharma, V. and Ananthanarayanan, Rajeshkannan (2013) A feature selection method using fixed-point algorithm for DNA microarray gene expression data. International Journal of Knowledge Based and Intelligent Engineering Systems, 18 (1). pp. 55-59. ISSN 1327-2314 Singh, Anirudh (2013) Fiji's biofuel industry: perched for a soaring take-of? Biofuels, 4 (6). pp. 587-589. ISSN 1759-7269 Singh, Ronit K. and Ahmed, Mohammed R. (2013) Blade design and performance testing of a small wind turbine rotor for low wind speed applications. Renewable Energy, 50 . pp. 812-819. ISSN 0960-1481 Srivastava, P.R. and Gokani, S.A. and Maurya, A.K. and Singh, R. and Kumar, Sushil and Veenadhari, B. and Selvakumaran, R. and Singh, A.K. and Siingh, D. and Lichtenberger, J. (2013) One - to - one relationship between low latitude whistlers and conjugate source lightning discharges and their propagation characteristics. Advances in Space Research, 52 (11). pp. 1966-1973. ISSN 0273-1177 Syed, T. and Das, S.R. and Biswas, S.N. and Assaf, Mansour and Petriu, E. (2013) On automated test system for asymmetric digital subscriber line equipment. World Journal of Engineering, 10 (4). pp. 387-394. ISSN 1708-5284 OtherAnanthanarayanan, Rajeshkannan and Khan, Mohammed and Jeevanantham, A.K. (2013) Influence of barreling in deformation and densification behaviour of sintered powder forged preforms. UNSPECIFIED. Assaf, Mansour and Chand, Praneel (2013) Fuzzy logic - based control algorithm for hybrid propulsion passenger boat. UNSPECIFIED. Chand, Praneel (2013) Robotics and automation at USP. UNSPECIFIED. Kumar, Abhikesh and Kumar, Sushil (2013) Tracking of tropical cyclones and their intensity changes in the South Pacific region using world - wide lightning location network. UNSPECIFIED. Mehta, Utkal V. and Khirwadkar, A. and Makwana, B. and Kakadiya, D. (2013) Vehicle guidance and traffic control system. UNSPECIFIED. (Unpublished) |