Items where Subject is "TA Engineering (General). Civil engineering (General)"

A

Accetta, A. and Aitchison, David and Cirrincione, G. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2016) Sensorless Induction Machine Drive for Fly-Wheel Energy Storage Systems with a TLS-based Non-linear Observer. [Conference Proceedings]

Accetta, A. and Alonge, F. and Cirrincione, Maurizio and D'Ippolito, Filippo and Pucci, M. and Rabbeni, R. and Sferlazza, A. (2019) Robust control for high performance induction motor drives based on partial state-feedback linearization. IEEE Transactions on Industry Applications, 64 . pp. 5608-5621. ISSN 0093-9994

Accetta, A. and Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2016) Feedback Linearizing Control of Induction Motor Considering Magnetic Saturation Effects. IEEE Transactions on Industry Applications, 52 (6). pp. 4843-4854. ISSN 0093-9994

Accetta, A. and Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2015) Feedback linearizing control of induction motor considering magnetic saturation effects. [Conference Proceedings]

Accetta, A. and Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2014) Parameter identification of induction motor model by means of state space-vector model output error minimization. [Conference Proceedings]

Accetta, A. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2018) A Saturation Model of the Synchronous Reluctance Motor and its Identification by Genetic Algorithms. [Conference Proceedings]

Accetta, A. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2020) State Space-Vector Model of Linear Induction Motors Including End-effects and Iron Losses: Part II: Model Identification and Results. IEEE Transactions on Industry Applications, 56 (1). pp. 245-255. ISSN 0093-9994

Accetta, A. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2018) State Space-Vector Model of Linear Induction Motors Including Iron Losses. Part I: Theoretical Analysis. [Conference Proceedings]

Accetta, A. and Cirrincione, Maurizio and Pucci, M. and Vitale, G. (2015) Closed - loop MRAS speed observer for linear induction motor drives. IEEE Transactions on Industry Applications, 51 (3). pp. 3821-3829. ISSN 0093-9994

Accetta, A. and Pucci , Marcello and Cirrincione, G. and Cirrincione, Maurizio (2017) On-line Wind Speed Estimation in IM Wind Generation Systems by Using Adaptive Direct and Inverse Modelling of the Wind Turbine. [Conference Proceedings]

Acetta, Angelo and Alonge, Francesco and Cirrincione, Maurizio and D'Ippolito, Filippo and Pucci , Marcello and Sferlazza, Antonino (2020) GA-Based Off-Line Parameter Estimation of the Induction Motor Model Including Magnetic Saturation and Iron Losses. IEEE Open Journal of Industry Applications, 1 . pp. 135-147. ISSN 2644-1241

Acetta, Angelo and Cirrincione, Maurizio and Di Piazza, Maria C. and La Tona, Giuseppe and Luna, Massimiliano and Pucci , Marcello (2020) Growing Neural Gas-based Maximum Torque per Ampere (MTPA) Technique for SynRMs. [Conference Proceedings]

Ahmed, Mohammed R. and Sharma, S.D. (2005) Turbulent mixing enhancement with a 10o chute mixer. Aircraft Engineering and Aerospace Technology, 77 (5). pp. 404-414. ISSN 0002-2667

Aitchison, David and Cirrincione, Maurizio and Leijtens, Niels (2016) Design Development of a Flywheel Energy Storage System for Isolated Pacific Island Communities. [Conference Proceedings]

Alonge, F. and Cirrincione, Maurizio and D'Ippolito, Filippo (2017) Active Disturbance Rejection Control of Linear Induction Motor. [Conference Proceedings]

Alonge, F. and Cirrincione, Maurizio and D'Ippolito, Filippo and Pucci, M. and Sferlazza, A. (2016) Adaptive feedback linearizing control of linear induction motor considering the end-effects. Control Engineering Practice, 55 . pp. 116-126. ISSN 0967-0661

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2016) Input-Output Feedback Linearization Control with On-line MRAS Based Inductor Resistance Estimation of Linear Induction Motors Including the dynamic End-Effects. IEEE Transactions on Industry Applications, 52 (1). pp. 255-266. ISSN 0093-9994

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2015) Input-Output Feedback Linearizing Control of Linear Induction Motor Taking into Consideration the End-Effects. Part I: Theoretical Analysis. Control Engineering Practice, 36 . pp. 133-141. ISSN 0967-0661

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2015) Input-Output Feedback Linearizing Control of Linear Induction Motor Taking into Consideration the End-Effects. Part II: Simulation and Experimental Results. Control Engineering Practice, 36 . pp. 142-150. ISSN 0967-0661

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2014) Input-output feedback linearization control of linear induction motors including the dynamic end-effects. [Conference Proceedings]

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2014) Input-output feedback linearizationcControl of linear induction motors including the end-effects. [Conference Proceedings]

Alonge, F. and Cirrincione, Maurizio and Pucci, M. and Sferlazza, A. (2015) A Nonlinear Observer for Rotor Flux Estimation Considering Magnetic Saturation Effects in Induction Motor Drives. [Conference Proceedings]

Ananthanarayanan, Rajeshkannan and Pandey, K.S. and Shanmugam, S. and Nayanasamy, R. and Narayan, Sumesh (2012) Some studies on sintered cold deformed plain carbon alloy steels. Materials & Design, 33 . pp. 115-120. ISSN 0264-1275

Ananthanarayanan, Rajeshkannan and Rengamani, D.S. and Sharma, Alokanand (2014) Some aspects on geometric and matrix work-hardening characteristics of sintered cold forged copper alloy performs. Materials Research, 17 (1). pp. 196-202. ISSN 1516-1439

Andriollo, M. and Kumar, Rahul R. and Tortella, A. and Zavagnin, Riccardo (2020) FEM based Assessment of Winding Inter-Tum Fault Indicators in Line Connected Induction Motors. [Conference Proceedings]

Arzu, Arieni and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2020) Wind Speed Forecasting using Regression, Time Series and Neural Network Models: A Case Study of Suva. [Conference Proceedings]

Assaf, Mansour and Chand, Praneel (2013) Fuzzy logic - based control algorithm for hybrid propulsion passenger boat. UNSPECIFIED.

Assaf, Mansour and Williams, K.M. (2012) RFID for the optimization of the public transportation system. [Conference Proceedings]

Aukitino, Tiaon and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2017) Wind energy resource assessment for Kiribati with a comparison of different methods of determining Weibull parameters. Energy Conversion and Management, TBC . pp. 641-660. ISSN 0196-8904

Aung, Than H. and Singh, Awnesh M. (2007) Preliminary results of the South Pacific sea level and climate monitoring project and its capacity building program. In: The Ocean Yearbook. Ocean Yearbook Series, 21 . Brill, Netherlands, pp. 69-89. ISBN 9004157557

Azid, Sheikh I. and Kumar, Sushil (2012) Monitoring and operation of intelligent home system using password protected SMS service. Journal of Intelligent Systems, 2 (1). pp. 10-13. ISSN 0034-1860

Azid, Sheikh I. and Shankaran, Vivek Pawan and Mehta, Utkal V. (2020) Fractional PI controller for Integrating Plants. [Conference Proceedings]

Azid, Sheikh I. and Shankaran, Vivek Pawan (2022) Hardware Implementation of the Fractional Controller on Quadrotor Aircraft. In: UNSPECIFIED Springer Nature Singapore, Singapore, pp. 169-194.

B

Bansal, Ramesh C. (2008) Modelling and automatic reactive power control of isolated wind-diesel hybrid power systems using ANN. Energy Conversion and Management, 49 (2). pp. 357-364. ISSN 0196-8904

Byttner, S. and Svensson, M. and Vatchkov, Gantcho L. (2011) Incremental classification of process data for anomaly based detection based on Similarity Analysis. [Conference Proceedings]

C

Chand, Abhinendra and Prasad, Ravnil and Mehta, Utkal V. and Assaf, Mansour (2015) A computer controlled positioning system for a turntable. [Conference Proceedings]

Chand, Aneesh A. and Prasad, Kushal A. and Islam, F M Rabiul and Mamun, Kabir and Kumar, Nallapaneni M. and Rajput, P. and Padmanaban, Sanjeevikumar and Nithiyananthan, K. (2020) AC/DC Microgrids. In: Microgrids. CRC Press, Boca Raton. ISBN 9780367815929

Chand, Aneesh A. and Prasad, Kushal A. and Mamun, Kabir and Islam, F M Rabiul (2019) Evaluation of concrete corrosion using EMI sensor. [Conference Proceedings]

Chand, Aneesh A. and Prasad, Kushal A. and Mamun, Kabir and Islam, F M Rabiul and Kumar, Nallapaneni M. and Rajput, P. and Padmanaban, Sanjeevikumar (2020) Microgrid Modeling and Simulations. In: Microgrids. CRC Press, Boca Raton. ISBN 9780367815929

Chand, Praneel (2012) Development of an artificial intelligence system for the instruction and control of cooperating mobile robots. Dissertation.com – Universal Publishers, Boca Raton, Florida, USA. ISBN 9781612339504, 1612339506

Chand, Praneel and Carnegie, D.A. (2011) Development of a navigation system for heterogeneous mobile robots. International Journal of Intelligent Systems Technologies and Applications, 10 (3). pp. 250-278. ISSN 1740-8865

Chand, Praneel and Carnegie, D.A. (2001) Development of a navigation system for heterogeneous mobile robots. International Journal of Intelligent Systems Technologies and Applications, 10 (3). pp. 250-278. ISSN 1740-8873

Chand, Praneel and Carnegie, D.A. (2012) Development of a reduced human user input task allocation method for multiple robots. Robotics and Autonomous Systems, 60 (10). pp. 1231-1244. ISSN 0921-8890

Chand, Praneel and Lal, Sunil P. and Kumar, Rahul R. (2016) Development of a force feedback system for a SCORBOT robotic arm gripper. ARPN Journal of Engineering and Applied Sciences, TBC . pp. 13766-13774. ISSN 1819-6608

Cirrincione, G. and Delgado, M. and Cirrincione, Maurizio (2014) The h-EXIN CCA for Bearing Fault Diagnosis. [Conference Proceedings]

Cirrincione, Giansalvo and Randazzo, Vincenzo and Pasero, Eros (2018) The Growing Curvilinear Component Analysis (GCCA) neural network. Neural Networks, 103 . 108 - 117. ISSN 0893-6080

Cirrincione, Maurizio and Islam, F M Rabiul and Nogara, P. and Vitale, Gianpaolo (2017) Impedance Estimation of FEA’s Grid in Fiji Islands by V-I Measurement by Using the Synchronous Reference Frame-PLL. [Conference Proceedings]

Cirrincione, Maurizio and Pucci, M. and Vitale, G. (2014) Neural MPPT of variable pitch wind generators with induction machines in a wide wind speed range. IEEE Transactions on Industry Applications, 49 (2). pp. 942-953. ISSN 0093-9994

Cirrincione, Giansalvo and Kumar, Rahul R. and Mohammadi, Ali and Kia, Shahin H. and Barbiero, Pietro and Ferreti, Jacopo (2020) Shallow versus deep neural networks in gear fault diagnosis. IEEE Transactions on Energy Conversion, 35 (3). pp. 1338-1347. ISSN 0885-8969

Cirrincione, Giansalvo and Randazzo, Vicenzo and Kumar, Rahul R. and Cirrincione, Maurizio and Pasero, Eros (2020) Growing Curvilinear Component Analysis (GCCA) for Stator Fault Detection in Induction Machines. In: Neural Approaches to Dynamics of Signal Exchanges. Springer Nature, Switzerland, pp. 235-244. ISBN 978-981-13-8949-8

Curto, Domenico and Franzitta, Vincenzo and Trapanese, Marco and Cirrincione, Maurizio (2020) A Preliminary Energy Assessment to Improve the Energy Sustainability in the Small Islands of the Mediterranean Sea. Journal of Sustainable Development of Energy, Water and Environment Systems, 8 (4). pp. 735-753. ISSN 1848-9257

D

Deo, Ravin N. and Birbilis, N. and Cull, James P. (2014) Measurement of corrosion in soil using the galvanostatic pulse technique. Corrosion Science, 80 . pp. 339-349. ISSN 0010-938X

Deo, Ravin N. and Cull, J.P. (2015) Denoising time - domain induced polarisation data using wavelet techniques. Exploration Geophysics, 47 (2). pp. 108-114. ISSN 0812-3985

Deo, Ravin N. and Cull, James P. (2015) Spectral Induced Polarization Techniques in Soil Corrosivity Assessments. Geotechnical Testing Journal, 38 (6). pp. 1-14. ISSN 0149-6115

Deo, Ashneel and Goundar, Jai and Narayan, Sumesh and Chettiar, Niranjwan (2016) Design and performance analysis of micro wind turbine for Fiji. International Journal of Information and Electronics Engineering, 6 (2016). pp. 37-40. ISSN 2010-3719

E

Eipakchi, Hamidreza and Nasrekani, Farid M. (2020) Response investigation of viscoelastic cylindrical shells with geometrical nonlinearity effect under moving pressure: An analytical approach. Mechanics of Advanced Materials and Structures, online . pp. 1-15. ISSN 1537-6494

Eipakchi, Hamidreza and Nasrekani, Farid M. (2020) Vibrational behavior of composite cylindrical shells with auxetic honeycombs core layer subjected to a moving pressure. Composite Structures, 254 . pp. 1-15. ISSN 0263-8223

Eipakchi, Hamidreza and Nasrekani, Farid M. and Ahmadi, Sepideh (2020) An analytical approach for the vibration behavior of viscoelastic cylindrical shells under internal moving pressure. Acta Mechanica, TBC . pp. 1-15. ISSN 0001-5970

Eipakchi, Hamidreza and Nasrekani, Farid M. (2024) Nonlinear response and resonance analysis of beam with non - uniform cross-section under harmonic and impulse excitations: an analytical approach. Acta Mechanica, NA . NA. ISSN 0001-5970

Elmasry, Yasser and Chaturvedi, Rishabh and Ali, Amjad and Mamun, Kabir and Hadrawi, Salema K. and Smaisim, Ghassan F. (2023) Numerical analysis and RSM modeling of the effect of using a V-cut twisted tape turbulator in the absorber tube of a photovoltaic/thermal system on the energy and exergy performances of the system. Engineering Analysis with Boundary Elements, 155 . pp. 340-350. ISSN 0955-7997

G

Gokani, Sneha. and Singh, Rajesh and Cohen, Morris B. and Kumar, Sushil and Venkatesham, K. and Maurya, A.K. and Selvakumaran, R. and Lichtenberger, J. (2015) Very low latitude (L=1.08) whistlers and correlation with lightning activity. Journal of Geophysical Research: Space Physics, 120 (8). pp. 6694-6706. ISSN 2156-2202

Goundar, Shivneel and Pillai, Muni and Mamun, Kabir and Islam, F M Rabiul and Deo, Ravin N. (2015) Real time condition monitoring system for industrial motors. [Conference Proceedings]

Greco, L. and Testa, C. and Cirrincione, Maurizio and Pucci, M. and Vitale, G. (2015) Effectiveness of a GNG - based MPPT and related control system for marine current turbines in unsteady operating conditions. [Conference Proceedings]

Guilbert, Damien and Gaillard, Arnaud and Mohammadi, Ali and N'Diaye, Abdoul and Djerdir, Abdesslem (2015) Investigation of the interactions between proton exchange membrane fuel cell and interleaved DC/DC boost converter in case of power switch faults. International Journal of Hydrogen Energy, 40 (1). pp. 519-537. ISSN 0360-3199

Gupta, Abhineet and Kumar, Kunal and Mehta, Utkal V. (2014) Active fire hazard monitoring device. UNSPECIFIED. (Unpublished)

I

Islam, F M Rabiul and Mamun, Kabir (2015) GIS based water quality monitoring system in pacific coastal area: A case study for Fiji. [Conference Proceedings]

Islam, F M Rabiul and Mamun, Kabir and Prakash, Krishneel and Lallu, Avneel (2017) Aromatic network for power distribution system. Australian Government-IP Australia, Australia.

Islam, F.R. and Lallu, Avneel and Mamun, Kabir and Prakash, Krishneel and Roy, N.K. (2020) Power quality improvement of distribution network using BESS and capacitor bank. Journal of Modern Power Systems and Clean Energy, 8 . pp. 1-8. ISSN 2196-5625

K

Kini, P.G. and Bansal, Ramesh C. and Aithal, R.S. (2008) Performance analysis of centrifugal pumps subjected to voltage variation and unbalance. IEEE Transactions on Industrial Electronics, 55 (2). pp. 562-569. ISSN 0278-0046

Kothari, Kajal and Mehta, Utkal V. and Prasad, Ravneel (2021) A single-step identification strategy for the coupled TITO process using fractional calculus. Transactions of the Institute of Measurement and Control, Online . pp. 1-11. ISSN 0142-3312

Kothari, Kajal and Mehta, Utkal V. and Vanualailai, Jito (2018) A novel approach of fractional-order time delay system modeling based on Haar wavelet. ISA Transactions, 80 . pp. 371-380. ISSN 0019-0578

Kumar, Ajal and Nair, Krishnam (2013) Wind power potential at Benau, Savusavu, Vanua Levu, Fiji. International Journal of Energy, Information and Communications, 4 (1). pp. 51-62. ISSN 2093-9655

Kumar, Avikesh and Ahmed, Mohammed R. and Khan, Mohammad G.M. (2020) Time-Variations of Wave-Energy and Forecasting Power Availability using Different Techniques. [Conference Proceedings]

Kumar, Dhirendran M. and Mudaliar, Hiye and Cirrincione, Maurizio and Pucci, Marcello (2019) An online parameter identification method for AC drives with induction motors. In: Modeling, Simulation and Control of Electrical Drives. The Institution of Engineering and Technology, London, United Kingdom, pp. 451-479. ISBN 978-1-78561-588-7

Kumar, Krishneel and Azid, Sheikh I. and Fagiolini, Adriano and Cirrincione, Maurizio (2020) Erle-copter Simulation using ROS and Gazebo. [Conference Proceedings]

Kumar, Shiu and Sharma, Ronesh and Sharma, Alokanand and Tsunoda, T. (2016) Decimation Filter with Common Spatial Pattern and Fishers Discriminant Analysis for Motor Imagery Classification. [Conference Proceedings]

Kumar, Sushil and Kumar, Abhikesh and Maurya, A.K. and Singh, R. (2016) Changes in the D region associated with three recent solar eclipses in the South Pacific region. Journal of Geophysical Research (Space Physics), 121 . pp. 1-14. ISSN 2156-2202

Kumar, Dhirendran M. and Catrini, Pietro and Piacentino, Antonio and Cirrincione, Maurizio (2023) Advanced modeling and energy-saving-oriented assessment of control strategies for air-cooled chillers in space cooling applications. Energy Conversion and Management, 291 . NA. ISSN 0196-8904

Kumar, Rahul R. and Cirrincione, G. and Cirrincione, Maurizio and Tortella, A. and Andriollo, M. (2020) Induction Machine Fault Detection and Classification Using Non-Parametric, Statistical-Frequency Features and Shallow Neural Networks. IEEE Transactions on Energy Conversion, TBC . TBC. ISSN 0885-8969

Kumar, Rahul R. and Cirrincione, Giansalvo and Cirrincione, Maurizio and Andriollo, M. and Tortella, A. (2018) Accurate Fault Diagnosis and Classification Scheme based on Non-Parametric, Statistical-Frequency Features and Neural Networks. [Conference Proceedings]

Kumar, Rahul R. and Cirrincione, Giansalvo and Cirrincione, Maurizio and Tortella, A. and Andriollo, M. (2021) A Topological Neural-Based Scheme for Classification of Faults in Induction Machines. IEEE Transactions on Industry Applications, 57 (1). pp. 272-283. ISSN 0093-9994

Kumar, Rahul R. and Cirrincione, Giansalvo and Cirrincione, Maurizio and Tortella, A. and Andriollo, M. (2018) A Topological and Neural Based Technique for Classification of Faults in Induction Machines. [Conference Proceedings]

Kumar, Rahul R. and Tortella, A. and Andriollo, M. (2020) Spectral and Discriminant Analysis Based Classification of Faults in Induction Machines. [Conference Proceedings]

L

Lal, Alvin and Datta, Bithin (2021) Robust Ensemble Modeling Paradigm for Groundwater Salinity Predictions in Complex Aquifer Systems. In: Groundwater Resources Development and Planning in the Semi-Arid Region. Springer Nature, Switzerland, pp. 53-72. ISBN 978-3-030-68123-4

Lal, Avisekh and Kumar, Ravitesh and Mehta, Utkal V. and Vachkov, Gancho (2014) Fuzzy energy distribution to a variable consumer load. The South Pacific Journal of Natural and Applied Sciences, 32 (2). pp. 37-42. ISSN 1838-837X

Lallu, Avneel and Islam, F M Rabiul and Mamun, Kabir and Prakash, Krishneel and Cirrincione, Maurizio (2017) Power quality improvement of distribution network using optimum combination of battery energy storage system and capacitor banks. [Conference Proceedings]

Lingam, Divnesh and Narayan, Sumesh and Mamun, Kabir and Charan, Dipanshil (2023) Engineered mycelium - based composite materials: comprehensive study of various properties and applications. Construction and Building Materials, 391 . NA. ISSN 0950-0618

Liu, Xinyi and Liu, Jianxing and Laghrouche, Salah and Cirrincione, Maurizio (2014) MPPT control of variable speed wind generators with squirrel cage induction machines. [Conference Proceedings]

Lyons, J. and Biswas, S.N. and Sharma, Alokanand and Dehzangi, A. and Paliwal, K.K. (2014) Protein fold recognition by alignment of amino acid residues using kernelized dynamic time warping. Journal of Theoretical Biology, 354 . pp. 137-145. ISSN 0022-5193

Lyons, S. and Dehzangi, A. and Heffernan, R. and Sharma, Alokanand and Paliwal, K.K. and Sattar, A. and Zhou, Y. and Yang, Y. (2014) Predicting backbone Cα angles and dihedrals from protein sequences by stacked sparse auto-encoder deep neural network. Journal of Computational Chemistry, 35 (28). pp. 2040-2046. ISSN 0192-8651

M

Macarthur, John and Narayan, Sumesh and Ananthanarayanan, Rajeshkannan and Seenivasagam, Devi Rengamani and Swami, Kamendra Narayan (2021) Process audit in a beverage industry - line efficiency and downtime analysis, a case study. International Journal of Productivity and Quality Management, 34 (1). pp. 1-19. ISSN 1746-6474

Mamun, Kabir and Deo, Ravin N. and Islam, F M Rabiul and Pota, Hemanshu R. and Chand, Aneesh A. and Prasad, Kushal A. and Cakacaka, Aisake (2019) A prototype of an electromagnetic induction sensor for non destructive estimation of the presence of corrosive chemicals ensuing concrete corrosion. Sensors, 19 (9). pp. 1959-1970. ISSN 1424-8220

Mamun, Kabir and Islam, F M Rabiul and Deo, Ravin N. and Chand, Aneesh A. and Cakacaka, Aisake and Prasad, Kushal A. (2018) An Emi Sensor for non - destructive corrosion estimation in concrete. IP Australia, Australia.

Mamun, Kabir and Islam, F M Rabiul and Haque, Rezwanul and Khan, Mohammad G.M. and Prasad, A.N and Haqva, H. and Mudliar, Ravindra R. and Mani, Francis S. (2019) Smart Water Quality Monitoring System Design and KPIs Analysis: Case Sites of Fiji Surface Water. Sustainability, 11 (24). pp. 1-21. ISSN 2071-1050

Mamun, Kabir and Sharma, Alokanand and Hoque, A. S. M. and Szecsi, T. (2014) Remote Patient Physical Condition Monitoring Service Module for iWARD Hospital Robots. [Conference Proceedings]

Mehta, Utkal V. and Chand, Praneel and Mamun, Kabir and Kumar, Shivneel and Chand, Nomneet and Chand, Vineel and Sen, Navneet and Kumar, Kunal and Komaitai, Henry (2015) Designing of a mobile irrigation system. [Conference Proceedings]

Mehta, Utkal V. and Khirwadkar, A. and Makwana, B. and Kakadiya, D. (2013) Vehicle guidance and traffic control system. UNSPECIFIED. (Unpublished)

Mehta, Utkal V. and Lechappe, Vincent and Singh, Om Prakash (2017) Simple FOPI tuning method for real - order time delay systems. In: Advances in Systems, Control and Automation. Springer, Singapore, pp. 459-468. ISBN 978-981-10-4762-6

Mofor, Linus and Nuttall, Peter and Newell, Alison (2014) Renewable Energy Options for Shipping-Technology Brief. [Professional and Technical Reports]

Mohammad Qolipour, Adel and Eipakchi, Hamidreza and Nasrekani, Farid M. (2022) Asymmetric/Axisymmetric buckling of circular/annular plates under radial load using first-order shear deformation theory. Thin-Walled Structures, 182 . pp. 1-14. ISSN 0263-8231

Mudaliar, Hiye and Kumar, Dhirendran and Rokocakau, Samuela and Ram, Krishnil R. and Assaf, Mansour and Cirrincione, Maurizio and Mohammadi, Ali (2018) FPGA - based multi - parametric non - linear model predictive control for a micro - grid in small islands. [Conference Proceedings]

N

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Densification behavior in forming of sintered iron – 0.35% carbon powder metallurgy preform during cold upsetting. Materials and Design, 32 (2). pp. 1006-1013. ISSN 0264-1257

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Influence of carbon content on strain hardening behaviour of sintered plain carbon steel preforms. Journal of Iron and Steel Research: International, 18 (9). pp. 33-40. ISSN 1006-706X

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Strain hardening behaviour in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting. Materials Research, 14 (4). pp. 1-7. ISSN 1516-1439

Narayan, Sumesh and Ananthanarayanan, Rajeshkannan (2011) Workability studies in forming of sintered Fe-0.35C powder metallurgy preform during cold upsetting. Journal of Iron and Steel Research: International, 18 (12). pp. 71-78. ISSN 1006-706X

Narayan, Sumesh and Deo, Ashneel and Raj, Anilesh and Kumar, Shaniel and Pratap, Ronesh (2022) Design, Fabrication and Testing of a Novel Wave Energy Converter. [Conference Proceedings]

Narayan, Sunil and Mehta, Utkal V. and Iro, Rıta and Sıkwa'ae, Hılda and Kothari, Kajal and Singh, Nikhil (2021) Realization of fractional band pass filter on reconfigurable analog device. International Review of Applied Sciences and Engineering, 13 (1). 63 - 69. ISSN 2062-0810

Nasrekani, Farid M. and Eipakchi, Hamidreza (2019) Axisymmetric buckling of cylindrical shells with non - uniform thickness and initial imperfection. International Journal of Steel Structures, 19 (2). pp. 435-445. ISSN 1598-2351

Nasrekani, Farid M. and Eipakchi, Hamidreza (2017) An analytical procedure for buckling load determination of cylindrical shells with variable thickness using first order shear deformation theory. AUT Journal of Mechanical Engineering, 1 (2). pp. 211-218. ISSN 2588-2945

Nasrekani, Farid M. and Raj, Aniket and Kumar, Manav (2023) Stress and buckling analysis of multilayered composite plates with different cut - outs using finite element method. [Conference Proceedings]

O

Onwubolu, Godfrey C. (2010) Prediction of burr formation during face milling using a hybrid GMDH network model with optimized cutting conditions. International Journal of Advanced Manufacturing Technology, 44 (11-12). pp. 1083-1093. ISSN 0268-3768

Onwubolu, Godfrey C. and Babu, B.V. (2004) New optimization techniques in engineering. Springer-Verlag, Heidelberg, Germany. ISBN 354020167X

Onwubolu, Godfrey C. and Davendra, Donald D. (2006) Scheduling flow shops using differential evolution algorithm. European Journal of Operational Research, 171 (2). pp. 674-692. ISSN 0377-2217

Onwubolu, Godfrey C. and Dube, B.C. (2006) Implementing an improved inventory control system in a small company: a case study. Production Planning and Control, 17 (1). pp. 67-76. ISSN 0953-7287

Onwubolu, Godfrey C. and Kumar, Shivendra (2006) Response surface methodology-based approach to CNC drilling operations. Journal of Materials Processing Technology, 171 (1). pp. 41-47. ISSN 0924-0136

P

Paeniu, Luke and Iese, Viliamu and Jacot des Combes, Helene and De Ramon N'Yeurt, Antoine and Korovulavula, Isoa T. and Koroi, Aliti and Sharma, P. and Hobgood, N. and Chung, K.L. and Devi, Ashmita (2015) Coastal protection: best practices from the Pacific. [Professional and Technical Reports]

Paliwal, K.K. and Sharma, Alokanand (2011) Approximate LDA technique for dimensionality reduction in the small sample size case. Journal of Pattern Recognition Research, 6 (2). pp. 298-306. ISSN 1558-884X

Paliwal, K.K. and Sharma, Alokanand (2012) Improved pseudoinverse linear discriminant analysis method for dimensionality reduction. International Journal of Pattern Recognition and Artificial Intelligence, 26 (1). p. 9. ISSN 0218-0014

Paliwal, K.K. and Sharma, Alokanand and Lyons, J. and Dehzangi, A. (2014) Improving protein fold recognition using the amalgamation of evolutionary-based and structural-based information. BMC Bioinformatics, 15 (16). pp. 1-9. ISSN 1471-2105

Patel, Sandeep K. and Prasad, Deepak D. and Ahmed, Mohammed R. (2014) Computational studies on the effect of geometric parameters on the performance of a solar chimney power plant. Energy Conversion and Management, 77 . pp. 424-431. ISSN 0196-8904

Pisaturo, M. and Cirrincione, Maurizio and Senatore, A. (2015) Influence of the temperature on the dry-clutch engagement control in gear-shift manoeuvres. [Conference Proceedings]

Prakash, Krishneel and Islam, F M Rabiul and Mamun, Kabir and Lallu, Avneel and Cirrincione, Maurizio (2017) Reliability of power distribution networks with renewable energy sources. [Conference Proceedings]

Prakash, Krishneel and Islam, F M Rabiul and Mamun, Kabir and Sharma, Abhineet and Sen, Avinesh (2018) Exergy analysis of a heating ventilation and air conditioning (HVAC) system. [Conference Proceedings]

Prakash, Krishneel and Islam, F.R. and Mamun, Kabir and Pota, H.R. (2020) Configurations of aromatic networks for power distribution system. Sustainability, 12 (10). pp. 1-17. ISSN 2071-1050

Prakash, Vinal V. and Raturi, Atul K. (2018) Solar energy for clean water access in Fiji. [Conference Proceedings]

Prakash, Krishneel and Ali, Muhammad and Siddique, Md N.I. and Chand, Aneesh A. and Kumar, Nallapaneni M. and Dong, Daoyi and Pota, Hemanshu R. (2022) A review of battery energy storage systems for ancillary services in distribution grids: current status, challenges and future directions. Frontiers in Energy Research, 10 . NA. ISSN 2296-598X

Prasad, Avneet and Mamun, Kabir and Islam, F M Rabiul and Haqva, Haq (2015) Smart water quality monitoring system. [Conference Proceedings]

Prasad, Deepak D. and Uliate, Tuputa and Ahmed, Mohammed R. (2009) Wind loads on low-rise building models with different roof configurations. International Journal of Fluid Mechanics Research, 36 (3). pp. 231-243. ISSN 1064-2277

Prasad, Krishneel and Singh, Anirudh (2015) Towards low carbon hotels in the Pacific region: a study of energy consumption and efficiency in hotels using models based on energy performance indicators. In: Climate Change in the Asia-Pacific Region. Climate Change Management . Springer International Publishing, Switzerland, pp. 357-374. ISBN 978-3-319-14937-0

Prasad, Ravita D. and Raturi, Atul K. (2018) Low - carbon measures for Fiji's land transport energy system. Utilties Policy, 54 . pp. 132-147. ISSN 0957-1787

Prasad, Ravita D. and Raturi, Atul K. (2019) Low carbon alternatives and their implications for Fiji's electricity sector. Utilities Policy, 56 . pp. 1-19. ISSN 0957-1787

Prasad, Ravita D. and Raturi, Atul K. (2018) Role of solar photovoltaics in future electricity generation in Fiji. [Conference Proceedings]

Prasad, Ravneel and Mehta, Utkal V. and Bloomfield, Sela and Charan, Navneet (2022) Fractional - order impedance identification for Inductors. Progress in Fractional Differentiation and Applications, 8 (3). pp. 459-465. ISSN 2356-9336

Prasad, Ravneel and Mehta, Utkal V. and Kothari, Kajal (2020) Fractional impedance of supercapacitor: an extended investigation. International Journal of Dynamics and Control, TBC . pp. 1-10. ISSN 2195-268X

Prasad, Shivneel and Kumar, Ajal and Raturi, Atul K. (2013) Optimization of a stand - alone renewable energy system for a small load requirement. In: Climate-Smart Technologies: Integrating Renewable Energy and Energy Efficiency in Mitigation and Adaptation Responses. Springer, Berlin, Heidelberg, pp. 615-628. ISBN 9783642377525

Pucci, M. and Cirrincione, Maurizio and Greco, L. and Testa, C. and Vitale, G. (2014) Marine current turbine generator system with induction machine growing neural gas (GNG) MPPT based on sensorless sea speed estimation. [Conference Proceedings]

R

Ranjan, Anjana and Mehta, Utkal V. (2022) Fractional filter IMC-TDD controller design for integrating processes. Results in Control and Optimization, 8 . NA. ISSN 2666-7207

Rao, Pulivarthi N. and Kumar, Nallapaneni M. and Padmanaban, Sanjeevikumar and Subathra, M.S.P. and Chand, Aneesh A. (2020) A novel sensorless approach for speed and displacement control of bearingless switched reluctance motor. Applied Sciences, 10 (12). NA. ISSN 2076-3417

Raturi, Atul K. (2018) Renewable 2018 Global Status. [Professional and Technical Reports]

Raturi, Atul K. (2015) Renewables 2015 Global Status Report. [Professional and Technical Reports]

Raturi, Atul K. and Singh, Aman (2011) Techno-Economic Feasibility of Grid Connected PV Systems in the Pacific Island Countries. [Conference Proceedings]

Rokocakau, Samuela and Mudaliar, Hiye and Kumar, Dhirendran M. and Aitchison, David and Cirrincione, Maurizio and Mohammadi, Ali (2019) A flywheel energy storage system in a microgrid for powering small villages in remote islands in the South Pacific. [Conference Proceedings]

Roy, Dilip K. and Lal, Alvin and Sarker, Khokan K. and Saha, Kowshik K. and Datta, Bithin (2021) Optimization algorithms as training approaches for prediction of reference evapotranspiration using adaptive neuro fuzzy inference system. Agricultural Water Management, 255 . NA. ISSN 0378-3774

S

Sachaniya, Prashant and Rathod, Jagdishkumar and Mehta, Utkal V. (2022) Design and Fabrication of Axially Corrugated Gaussian Profiled Horn Antenna. In: Smart Antennas. EAI/Springer Innovations in Communication and Computing . Springer Nature, Switzerland. ISBN 978-3-030-76635-1; 978-3-030-76636-8

Saini, Harsh and Raicar, Gaurav and Lal, Sunil P. and Dehzangi, Abdollah and Imoto, S. and Sharma, Alokanand (2016) Protein fold recognition using genetic algorithm optimized voting scheme and profile bigram. Journal of Software, 11 (8). pp. 756-767. ISSN 1796-217X

Saket, R.K. and Bansal, Ramesh C. and Kumar, A.K.S. (2007) Reliability evaluation of micro hydro-photo-voltaic hybrid power generation using municipal waste water, GMSARN (Global Mekong Subregion Academic and Research Network). GMSARN International Journal, 1 (1). pp. 13-20. ISSN 1905-9094

Sarwal, Amit (2016) Do you know New Delhi was designed based on Australian Architect's plans? [Creative Works]

Shankaran, Vivek Pawan and Azid, Sheikh I. and Mehta, Utkal V. (2022) Fractional - order PI plus D controller for second - order integrating plants: stabilization and tuning method. ISA Transactions, 129 . pp. 592-604. ISSN 0019-0578

Shankaran, Vivek Pawan and Azid, Sheikh Izzal and Mehta, Utkal V. and Fagiolini, Adriano (2022) Improved Performance in Quadrotor Trajectory Tracking Using MIMO PI-D Control. IEEE Access, 10 . pp. 110646-110660. ISSN 2169-3536

Sharan, Ashneel and Lal, Alvin and Datta, Bithin (2021) A review of groundwater sustainability crisis in the Pacific Island countries: challenges and solutions. Journal of Hydrology, 603 . NA. ISSN 0022-1694

Sharma, Alokanand (2005) Pattern classification: an improvement using VQ and PCA based techniques. American Journal of Applied Sciences, 2 (10). pp. 1445-1455. ISSN 1546-9239

Sharma, Alokanand (2008) Rotational linear discriminant analysis technique for dimensionality reduction. IEEE Transactions on Knowledge and Data Engineering, 20 (10). pp. 1336-1347. ISSN 1041-4347

Sharma, Alokanand (2005) Signal modeling in speaker recognition. Botswana Journal of Technology, 14 (1). pp. 63-70. ISSN 1019-1593

Sharma, Alokanand (2004) Subband coder of speech signal. Botswana Journal of Technology, 13 (1). pp. 13-17. ISSN 1019-1593

Sharma, Alokanand and Imoto, S. and Miyano, S. (2012) A between-class overlapping filter-based method for transcriptome data analysis. Journal of Bioinformatics and Computational Biology, 10 (5). pp. 1-20. ISSN 0219-7200

Sharma, Alokanand and Imoto, S. and Miyano, S. (2012) A filter based feature selection algorithm using null space of covariance matrix for DNA microarray gene expression data. Current Bioinformatics, 7 (3). pp. 289-294. ISSN 1574-8936

Sharma, Alokanand and Imoto, S. and Miyano, S. (2012) A top-r feature selection algorithm for microarray gene expression data. IEEE-ACM Transactions on Computational Biology and Bioinformatics, 9 (3). pp. 754-764. ISSN 1557-9964

Sharma, Alokanand and Imoto, S. and Miyano, S. and Sharma, V. (2012) Null space based feature selection method for gene expression data. International Journal of Machine Learning and Cybernetics, ? . ?-?. ISSN 1868-8071

Sharma, Alokanand and Koh, C.H. and Imoto, S. and Miyano, S. (2011) Strategy of finding optimal number of features on gene expression data. Electronics Letters, IEE, 47 (8). pp. 480-482. ISSN 0013-5194

Sharma, Alokanand and Lal, Sunil P. (2011) Tanimoto based similarity measure for intrusion detection system. Journal of Information Security, 2 (4). pp. 195-201. ISSN 2153-1234

Sharma, Alokanand and Onwubolu, Godfrey C. (2008) Intrusion detection system using hybrid differential evolution and group method of data handling approach. [Conference Proceedings]

Sharma, Alokanand and Paliwal, K.K. (2008) Cancer classification by gradient LDA technique using microarray gene expression data. Data & Knowledge Engineering, 66 (2). pp. 338-347. ISSN 0169-023X

Sharma, Alokanand and Paliwal, K.K. (2006) Rotational linear discriminant analysis using Bayes Rule for dimensionality reduction. Journal of Computer Science, 2 (9). pp. 754-757. ISSN 1549-3636

Sharma, Alokanand and Paliwal, K.K. (2006) Splitting technique initialization in local PCA. Journal of Computer Science, 2 (1). pp. 53-58. ISSN 1549-3636

Sharma, Alokanand and Paliwal, K.K. (2006) Subspace independent component analysis using vector kurtosis. Pattern Recognition, 39 . pp. 2227-2232. ISSN 0031-3203

Sharma, Alokanand and Paliwal, K.K. (2012) A gene selection algorithm using Bayesian classification approach. American Journal of Applied Sciences, 9 (1). pp. 127-131. ISSN 1546-9239

Sharma, Alokanand and Paliwal, K.K. (2008) A gradient linear discriminant analysis for small sample sized problem. Neural Processing Letters, 27 (1). pp. 17-24. ISSN 1370-4621

Sharma, Alokanand and Paliwal, K.K. (2012) A new perspective to null linear discriminant analysis method and its fast implementation using random matrix multiplication with scatter matrices. Pattern Recognition, 45 (6). pp. 2205-2213. ISSN 0031-3203

Sharma, Alokanand and Paliwal, K.K. (2012) A two-stage linear discriminant analysis for face-recognition. Pattern Recognition Letters, 33 (9). pp. 1157-1162. ISSN 0167-8655

Sharma, Alokanand and Paliwal, K.K. and Imoto, S. and Miyano, S. (2014) A feature selection method using improved regularized linear discriminant analysis. Machine Vision and Applications, 25 (3). pp. 775-786. ISSN 0932-8092

Sharma, Alokanand and Paliwal, K.K. and Onwubolu, Godfrey C. (2006) Class-dependent PCA, MDC and LDA: a combined classifier for pattern classification. Pattern Recognition, 39 (7). pp. 1215-1229. ISSN 0031-3203

Sharma, Krishneel K. and Deo, Ravin N. and Kumar, Ajal and Mamun, Kabir (2014) Corrosion of infrastructure in pacific island countries due to rising sea levels. UNSPECIFIED. (Unpublished)

Sharma, Krishneel K. and Deo, Ravin N. and Kumar, Ajal and Mamun, Kabir (2015) Rebar corrosion due to chlorides in the presence of different cations. UNSPECIFIED.

Shoaei, Amirali G. and Eipakchi, Hamidreza and Nasrekani, Farid M. (2024) Auxetic honeycomb core layer effect on vibrations of annular plates based on shear deformation theory. Engineering Structures, 306 (117855). NA. ISSN 0141-0296

Singh, Anirudh (2015) Handbook of Climate Change Adaptation. [Book, Journal, Proceedings Edited]

Singh, Anirudh (2015) The role of renewable energy and energy efficiency in the Fijian archipelago - insights from policy and technology implementations. UNSPECIFIED.

Singh, Anirudh (2009) The sustainable development of Fiji's energy infrastructure: a status report. Pacific Economic Bulletin, 24 (2). pp. 141-154. ISSN 0817-8038

Singh, Krishneel and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2022) Wind energy resource assessment for Cook Islands with accurate estimation of Weibull parameters using frequentist and Bayesian methods. IEEE Access, 10 . pp. 25935-25953. ISSN 2169-3536

Singh, Krishneel and Kutty, Saiyad S. and Khan, Mohammad G.M. and Ahmed, Mohammed R. (2019) Wind Energy Resource Assessment for Tokelau with Accurate Weibull Parameters. [Conference Proceedings]

Singh, P.J. and Sagaitu, M. (1998) Engineering drawing & visual skills development. Dept. of Technology, USP, The University of the South Pacific, Suva, Fiji. ISBN 9829001008

Singh, Ravinesh and Onwubolu, Godfrey C. and Singh, Krishnileshwar P. and Ram, R. (2006) DC motor control predictive models. American Journal of Applied Sciences, 3 (11). pp. 2096-2102. ISSN 1546-9239

Singh, Roslyn P. and Li, Zhenquan (2007) A mass conservative streamline tracking method for three dimensional CFD velocity fields. Journal of Flow Visualization and Image Processing, 14 (1). pp. 107-120. ISSN 1065-3090

Small , Darcy and Bruce, Anna and Macgill, Iain and Raturi, Atul K. and Prakash, Vinal V. (2018) Delivery of Energy Services in Unfamiliar Contexts: Learnings from Fiji. [Conference Proceedings]

V

Vachkov, G. and Sharma, Alokanand (2014) Growing radial basis function network models. [Conference Proceedings]

Vans, E. and Vachkov, G. and Sharma, Alokanand (2014) Vision Based Autonomous Path Tracking of a Mobile Robot using Fuzzy Logic. [Conference Proceedings]

Vatchkov, Gantcho L. (2013) Online detection of deviation in performance of multichannel dynamical processes. [Conference Proceedings]

W

Wardah, Wafaa and Dehzangi, Abdollah and Taherzadeh, G. and Rashid, Mahmood and Khan, Mohammad G.M. and Tsunoda, Tatsuhiko and Sharma, Alokanand (2020) Predicting protein-peptide binding sites with a Deep Convolutional Neural Network. Journal of Theoretical Biology, 110278 . TBC. ISSN 0022-5193

Wood, Michael D. and Sun, X. and Tong, L. and Katzos, A. and Rispler, A.R. and Mai, Y-W. (2007) The effect of stitch distribution on mode I delamination toughness of stitched laminated composites – experimental results and FEA simulation. Composites Science and Technology, 67 (6). pp. 1058-1072. ISSN 0266-3538

Wood, Michael D. and Sun, X. and Tong, L. and Luo, Q. and Katzos, A. and Rispler, A.R. (2007) A new ENF test specimen for the mode II delamination toughness testing of stitched woven CFRP laminates. Journal of Composite Materials, 41 (14). pp. 1743-1772. ISSN 0021-9983

Y

Ye, Binying and Cirrincione, Maurizio and Pucci, M. and Cirrincione, G. (2015) Sensorless Control of Induction Motors by the MSA based MUSIC Technique. [Conference Proceedings]

Ye, Binying and Cirrincione, Maurizio and Pucci, M. and Cirrincione, G. (2015) Speed Sensorless Control Of Induction Motors Based On MCA Exin Pisarenko Method. [Conference Proceedings]

Z

Zhang, Lei and Laghrouche, Salah and Harmouche, Mohamed and Cirrincione, Maurizio (2017) Super twisting control of linear induction motor considering end effects with unknown load torque. [Conference Proceedings]

Zhang, Lei and Obeid, Hussein and Laghrouche, Salah and Cirrincione, Maurizio (2019) Second order sliding mode observer of linear induction motor. IET Electric Power Applications, 13 (1). pp. 38-47. ISSN 1751-8660