Goundar, Jai and Prasad, Deepak D. and Ahmed, Mohammed R. (2018) Design of a ducted cross - flow turbine for marine current energy extraction. [Conference Proceedings]
PDF (Final version published by ASME)
- Published Version
Restricted to Repository staff only Available under License Creative Commons Attribution Non-commercial. Download (816kB) | Request a copy |
Abstract
Marine current energy is a clean energy source and is a solution to the problems faced by burning fossil fuels such as global warming and climate change. Once tapped, the useful shaft power can be converted into electrical energy. To make this practical, the designed energy converter should be capable of operating at low marine current velocities, it should be suitable for installation at locations that have low water depths and should have lower manufacturing, installation and maintenance costs. A ducted cross-flow turbine has all the above features and it will be suitable for Pacific Island countries (PICs) for extracting marine current energy. The ducted cross-flow turbine was designed, modelled and analyzed in commercial Computational Fluid dynamic (CFD) code ANSYS-CFX. The inlet and outlet duct sizes were optimized for maximum output. Before the analysis of full model, the CFD results were validated with experimental results. Simulations for the 1:10 ducted cross-flow turbine (having a diameter of 150 mm) were performed with 400,000 nodes, as increase in the grid size did not make much difference other than increasing the simulation time significantly. The maximum difference in the power coefficient between CFD and experimental results was 6%. Simulations were then performed for the full-scale prototype, which has a duct (nozzle) inlet of 3.5 m x 3.5 m and a turbine diameter of 1.5 m, at three freestream velocities of 0.65 m/s, 1.95 m/s and 3.25 m/s. Analysis of the prototype performance showed that the ducted cross-flow turbine can reach a maximum efficiency of 56% and can produce 21.5 kW of power at a current speed of 1.95 m/s and 103.6 kW at 3.25 m/s. The designed cut-off speed was 4 m/s.
Item Type: | Conference Proceedings |
---|---|
Additional Information: | DOI:10.1115/IMECE2018-87324 Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition |
Uncontrolled Keywords: | Design; Turbine; Cross-flow |
Subjects: | T Technology > TJ Mechanical engineering and machinery |
Divisions: | Faculty of Science, Technology and Environment (FSTE) > School of Engineering and Physics |
Depositing User: | M. Rafiuddin Ahmed |
Date Deposited: | 14 Mar 2019 03:45 |
Last Modified: | 31 Aug 2021 10:38 |
URI: | https://repository.usp.ac.fj/id/eprint/11381 |
Actions (login required)
View Item |